Pregled po CROSBI profilu: Stjepan Stipetić (CROSBI Profil: 27279, MBZ: 307523)
Pronađeno 81 radova
-
1.Jukić, Filip; Pravica, Luka; Stipetić, StjepanSensorless Synchronization Method For a Grid-Side Converter With an LCL Filter Based On a Sliding Mode Observer and Discontinuous Operating Mode // XXV. International Conference on Electrical Machines (ICEM 2022) / Antonino-Daviu, Jose A. ; Capolino, Gerard-Andre (ur.).
Valencia, 2022. str. 1300-1306 doi:10.1109/ICEM51905.2022.9910908 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Ban, Branko; Stipetic, StjepanSystematic Metamodel-Based Optimization Study of Synchronous Reluctance Machine Rotor Barrier Topologies // Machines, 10 (2022), 8; 712, 23 doi:10.3390/machines10080712 (međunarodna recenzija, članak, znanstveni)
-
3.Ban, Branko; Stipetić, StjepanRobust feasibility verification and region inner- point detection algorithms for geometric shape objects applied to electric machine optimization workflow // Structural and multidisciplinary optimization, 65 (2022), 175, 11 doi:10.1007/s00158-022-03263-4 (međunarodna recenzija, članak, znanstveni)
-
4.Ban, Branko; Stipetić, StjepanAbsolutely Feasible Synchronous Reluctance Machine Rotor Barrier Topologies with Minimal Parametric Complexity // Machines, 10 (2022), 3; 206, 22 doi:10.3390/machines10030206 (međunarodna recenzija, članak, znanstveni)
-
5.Miličević, Lucija; Stipetić, Stjepan; Hlupić, MarioOptimiranje elektrovučnih motora temeljeno na metamodeliranju // 15. savjetovanje HRO CIGRÉ, 2021.
Šibenik, Hrvatska, 2021. str. 1-10 (predavanje, domaća recenzija, cjeloviti rad (in extenso), stručni) -
6.Stipetić, Stjepan; Brajković, Marin; Čuljak, Antonio; Kolarić, TomislavIspitivanje električnih strojeva za pogone promjenjive brzine vrtnje prema normi IEC 60034-2-3 // 15. savjetovanje HRO CIGRÉ, 2021.
Šibenik, Hrvatska, 2021. str. 1-10 (predavanje, domaća recenzija, cjeloviti rad (in extenso), stručni) -
7.Ban, Branko; Stipetić, Stjepan; Jerčić, TinoMinimum Set of Rotor Parameters for Synchronous Reluctance Machine and Improved Optimization Convergence via Forced Rotor Barrier Feasibility // Energies, 14 (2021), 10; 2744, 16 doi:10.3390/en14102744 (međunarodna recenzija, članak, znanstveni)
-
8.Sirotić, Igor; Kovačić, Marinko; Stipetić, StjepanMethodology and Measurement Setup for Determining PWM Contribution to Iron Loss in Laminated Ferromagnetic Materials // IEEE transactions on industry applications, 57 (2021), 5; 4796-4804 doi:10.1109/TIA.2021.3094501 (međunarodna recenzija, članak, znanstveni)
-
9.Ban, Branko; Stipetić, StjepanDesign and optimization of Synchronous Reluctance Machine for actuation of Electric Multi-purpose Vehicle Power Take-Off // 2020 International Conference on Electrical Machines (ICEM)
Göteborg, Švedska, 2020. str. 1750-1757 doi:10.1109/ICEM49940.2020.9270784 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.Martinović, Marijan; Stipetić, Stjepan; Žarko, Damir; Klanac, Mario;Comparison of Synchronous Reluctance Machines Using Topology Optimization // 2020 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM)
online, 2020. str. 472-477 doi:10.1109/SPEEDAM48782.2020.9161937 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Volarić, Mario; Mikulić, Ivan; Stipetić, StjepanDesign of Permanent Magnet Synchronous Motor for Formula Student competition // 2020 International Symposium on Industrial Electronics and Applications (INDEL)
Banja Luka, Bosna i Hercegovina, 2020. str. 101-107 doi:10.1109/INDEL50386.2020.9266256 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
12.Sirotić, Igor; Kovačić, Marinko; Stipetić, StjepanMethodology and measurement setup for determination of PWM influence on iron losses // 2020 International Conference on Electrical Machines (ICEM)
Göteborg, Švedska, 2020. str. 932-939 doi:10.1109/ICEM49940.2020.9271048 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.Stipetić, Stjepan; Žarko, Damir; Ćavar, NikšaAdjustment of Rated Current and Power Factor in a Synchronous Reluctance Motor Optimally Designed for Maximum Saliency Ratio // IEEE transactions on industry applications, 56 (2020), 3; 2481-2490 doi:10.1109/TIA.2020.2971442 (međunarodna recenzija, članak, znanstveni)
-
14.Ban, Branko; Stipetić, StjepanElectric Multipurpose Vehicle Power Take-Off: Overview, Load Cycles and Actuation via Synchronous Reluctance Machine // 2019 International Aegean Conference on Electrical Machines and Power Electronics (ACEMP) & 2019 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM)
Istanbul, Turska, 2019. str. 596-603 doi:10.1109/ACEMP-OPTIM44294.2019.9007187 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
15.Žarko Damir; Nađ Slaven; Stipetić Stjepan; Klanac, MarioGenerator s permanentnim magnetima za male hidroelektrane // 14. savjetovanje HRO CIGRÉ, 2019
Šibenik, Hrvatska, 2019. str. 1-10 (predavanje, domaća recenzija, cjeloviti rad (in extenso), stručni) -
16.Stipetić, Stjepan; Kovačić, Marinko; Žarko, Damir; Erceg IgorSinkroni reluktantni generatori za mikro hidroelektrane (HYDREL) // 14. savjetovanje HRO CIGRÉ, 2019
Šibenik, Hrvatska, 2019. str. 1-9 (predavanje, domaća recenzija, cjeloviti rad (in extenso), stručni) -
17.Klanac, Mario; Žarko, Damir; Stipetić, StjepanComparison of Ant Colony and Differential Evolution Optimization Methods Applied to a Design of Synchronous Reluctance Machine // International Conference of Electrical Drives and Power Electronics (EDPE)
Vysoké Tatry, Slovačka, 2019. str. 360-366 doi:10.1109/EDPE.2019.8883939 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Ban, Branko; Stipetić, Stjepan; Klanac, MarioSynchronous Reluctance Machines: Theory, Design and the Potential Use in Traction Applications // International Conference of Electrical Drives and Power Electronics (EDPE)
Vysoké Tatry, Slovačka, 2019. str. 177-188 doi:10.1109/EDPE.2019.8883905 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Kutija, Martina; Keko, Hrvoje; Penić, Dora; Hanić, Zlatko; Stipetić, StjepanA novel concept for micro hydropower plants based on synchronous reluctance generators // HYDRO 2019 - Concept to closure: Practical steps
Wallington: The International Journal on Hydropower & Dams, Aqua-Media International Ltd, 2019. 28.02, 8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Pravica, Luka; Jukić, Filip; Bariša, Tin; Stipetić, StjepanInterior Permanent Magnet Wind Generator Torque Estimation Considering Low-Pass Filter Phase Shift Compensation // 2018 International Symposium on Industrial Electronics (INDEL)
Banja Luka, Bosna i Hercegovina, 2018. 41, 5 doi:10.1109/INDEL.2018.8637623 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Žarko, Damir; Stipetić, StjepanAdjustment of Rated Current in Design of Synchronous Reluctance Motors Using Axial Scaling and Rewinding // Proceedings of 2018 XIII International Conference on Electrical Machines (ICEM)
Aleksandropoli, Grčka: Institute of Electrical and Electronics Engineers (IEEE), 2018. str. 39-45 doi:10.1109/icelmach.2018.8506875 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Stipetić, Stjepan; Žarko, Damir; Ćavar, NikšaDesign Methodology for Series of IE4/IE5 Synchronous Reluctance Motors Based on Radial Scaling // Proceedings of 2018 XIII International Conference on Electrical Machines (ICEM)
Aleksandropoli, Grčka: Institute of Electrical and Electronics Engineers (IEEE), 2018. str. 146-151 doi:10.1109/icelmach.2018.8507100 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Hanić, Zlatko; Vuljaj, Damir; Stipetić, Stjepan; Žarko, DamirMTPA Control Strategy for Interior Permanent Magnet Synchronous Machines Derived Using Current Dependent Flux Linkage Functions // 7th International Symposium on Applied Electromagnetics SAEM'18 - Book of digests
Podčetrtek: Univerzitetna založba Univerze v Mariboru, 2018. str. 1-11 (predavanje, međunarodna recenzija, kratko priopćenje, znanstveni) -
24.Stipetić, Stjepan; Goss, James; Zarko, Damir; Popescu, MirceaCalculation of Efficiency Maps Using Scalable Saturated Model of Synchronous Permanent Magnet Machines // IEEE transactions on industry applications, 54 (2018), 5; 4257-4267 doi:10.1109/TIA.2018.2837672 (međunarodna recenzija, članak, znanstveni)
-
25.Ramakrishnan, Kesavan; Stipetić, Stjepan; Gobbi, Massimiliano; Mastinu, GianpieroOptimal sizing of traction motors using scalable electric machine model // IEEE Transactions on Transportation Electrification, 4 (2018), 1; 314-321 doi:10.1109/TTE.2017.2750488 (podatak o recenziji nije dostupan, članak, znanstveni)
