Pregled po CROSBI profilu: Željan Lozina (CROSBI Profil: 20873, MBZ: 96925)
Pronađeno 139 radova
-
1.Lozina, Željan; Sedlar, Damir; Bartulović, AnđelaModal superposition of non-classically damped transient problems with position and velocity dependent force // The Fourteenth International Conference on Computational Structures Technology
Montpellier, Francuska, 2022. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Lozina, Zeljan; Sedlar, Damir; Bartulovic, AndelaTransient Vibration of the Ship Power Train in Polar Conditions // The 10th International Conference on Wave Mechanics and Vibrations (WMVC 2022) / Dimitrovová, Zuzana ; Biswas, Paritosh ; Gonçalves, Rodrigo ; Silva, Tiago (ur.).
Lisabon, Portugal: Springer, 2022. str. 998-1006 doi:10.1007/978-3-031-15758-5_103 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Sedlar, Damir; Lozina, Željan; Bartulović, AnđelaAcoustic signal analysis using cross-correlation method in experiments with different sound source // Proceedings of the 10th ICCSM
Pula, Hrvatska, 2022. str. 243-244 (predavanje, međunarodna recenzija, prošireni sažetak, znanstveni) -
4.Lozina, Željan; Sedlar, Damir; Bartulović, AnđelaTorsional vibration induced with the position dependent impacts // Proceedings of the 10th ICCSM
Pula, Hrvatska, 2022. str. 195-196 (predavanje, međunarodna recenzija, prošireni sažetak, znanstveni) -
5.Sedlar, Damir; Lozina, Zeljan; Ljubas, JosipaTransient analysis of sound in long straight air duct with insulation barrier // 10th International Conference on Wave Mechanics and Vibrations
Lisabon, Portugal, 2022. 61, 1 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
6.Sedlar, Damir; Lozina, Zeljan; Tomac, IvanDiscrete Optimization of Truss Structures Using Variable Neighborhood Search // Iranian Journal of Science and Technology, Transactions of Civil Engineering, 46 (2022), 1249-1264 doi:10.1007/s40996-021-00704-w (međunarodna recenzija, članak, znanstveni)
-
7.Samardžić, Domagoj; Lozina, Željan;Numerical solution of truss and beam made of hyperelastic material in different dimensional configurations // SpliTech 2021
Split, Hrvatska, 2021. (poster, domaća recenzija, neobjavljeni rad, stručni) -
8.Domagoj SamardžićANALIZA DEFORMACIJA I NAPREZANJA ELEMENATA IZRAÐENIH OD HIPERELASTICNIH MATERIJALA, 2021., diplomski rad, diplomski, Fakultet elektrotehnike, strojarstva i brodogradnje, Split
-
9.Tomac, Ivan; Slavič, Janko; Lozina, Željan; Sedlar, DamirDamping Identification Using Extended Morlet-Wave Method from High-Speed Video Data // IMAC 39. - International Modal Analysis Conference
online;, 2021. (ostalo, međunarodna recenzija, neobjavljeni rad, znanstveni) -
10.Sedlar, Damir; Lozina, Zeljan; Bartulovic, AndelaMulti-catenary isogeometric discretization with the sliding constraint // Acta mechanica sinica, 37 (2021), 1; 80-91 doi:10.1007/s10409-020-01021-7 (međunarodna recenzija, članak, znanstveni)
-
11.Lozina, Zeljan; Sedlar, Damir; Bartulovic, AndelaAn evaluation of the generalized–α time integration scheme for a transient response of nonlinear structures // Engineering Structures, 204 (2020), 1-20 doi:10.1016/j.engstruct.2019.109992 (međunarodna recenzija, članak, znanstveni)
-
12.Sedlar, Damir; Lozina, Zeljan; Bartulovic, AndelaTime integration methods for flexible pendulum with slider // 5th International Conference on Smart and Sustainable Technologies
Split, 2020. 1570636777, 6 doi:10.23919/SpliTech49282.2020.9243786 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.Lozina, Željan; Sedlar, Damir; Bartulovic, AndelaEvaluation of the transient problem integration in vicinity of resonance // 5th International Conference on Smart and Sustainable Technologies
Split, 2020. 1570637450, 4 doi:10.23919/SpliTech49282.2020.9243802 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Vladislavic, Antonio; Lozina, Zeljan; Sedlar, DamirNonlinear dynamics quarter car model and response to road excitation // 4th International Conference on Smart and Sustainable Technologies (SpliTech 2019) / Rodrigues, Joel J.P.C. ; Nizetic, Sandro (ur.).
Split, 2019. S19 - 1570535331 - 1806, 4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
15.Bartulović, Anđela; Lozina, ŽeljanLevel set topology optimization based on isogeometrical formulation of plane elasticity problems // SpliTech2019
Bol, Hrvatska, 2019. 1570537710, 5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Senjanović, Ivo; Alujević, Neven; Ćatipović, Ivan; Čakmak, Damjan; Vladimir, Nikola; Lozina, ŽeljanSome dilemmas in energy approach to vibration and stability analysis of pressurized and rotating toroidal shells // International journal for engineering modelling, 32 (2019), 1; 59-76 doi:10.31534/engmod.2019.1.ri.01f (međunarodna recenzija, članak, znanstveni)
-
17.Lozina, Željan; Sedlar, Damir; Tomac, IvanIsogeometric approach to the dynamics of the catenary exposed to large displacements // Acta mechanica, 230 (2019), 1; 351-16 doi:10.1007/s00707-018-2321-1 (međunarodna recenzija, članak, znanstveni)
-
18.Lozina, Zeljan; Sedlar, Damir; Bartulovic, AndjelaIntegration schemes for the transient dynamics of nonlinear cable structures // 6th European Conference on Computational Mechanics (ECCM 2018) ; 7th European Conference on Computational Fluid Dynamics (ECFD 2018)
Glasgow, Ujedinjeno Kraljevstvo, 2018. 1221, 10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Lozina, Željan; Sedlar, Damir; Tomac, IvanAn Identification of the unbalanced magnetic pull in generator at excitation and the hydropower machine model validation // MATEC Web of Conferences, 211 (2018), 06003, 6 doi:10.1051/matecconf/201821106003 (međunarodna recenzija, članak, znanstveni)
-
20.Lozina, Željan; Sedlar, Damir; Bartulović, AnđelaThe nonlinear cable structures dynamics - IGA approach // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2018. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Bartulović, Anđela; Lozina, ŽeljanIsogeometric based shape optimization of plate with hole under constant in-plane tension // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2018. str. 1-9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Sedlar, Damir; Lozina, Željan; Tomac, IvanNonlinear Static Analysis of Cable Structures Based on Isogeometric Analysis // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2018. str. 1-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Sedlar, Damir; Lozina, Zeljan; Tomac, IvanThe dynamic analysis of suspended cable due to a sliding body // 14th International Conference on Vibration Engineering and Technology of Machinery / Maia, Nuno ; Dimitrova, Zuzana (ur.).
Lisabon, 2018. str. 106-106 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
24.Bartulović, Anđela; Lozina, Željan; Vučina, DamirLocking-free space curved beam element based on mixed displacement/strain formulation // International Conference on Isogeometric Analysis IGA 2017
Pavia, Italija, 2017. (predavanje, međunarodna recenzija, neobjavljeni rad, znanstveni) -
25.Sedlar, Damir; Lozina, Željan; Bartulović, AnđelaGeometric nonlinear analysis of cable structures using isogeometric cable elements // International Conference on Isogeometric Analysis IGA 2017
Pavia, Italija, 2017. (predavanje, međunarodna recenzija, neobjavljeni rad, znanstveni) -
26.Tomac, Ivan; Lozina, Željan; Sedlar, DamirExtended Morlet-Wave damping identification method // International journal of mechanical sciences, 117 (2017), 31-40 doi:10.1016/j.ijmecsci.2017.01.013 (međunarodna recenzija, članak, znanstveni)
-
27.Sedlar, Damir; Lozina, Željan; Tomac, IvanOptimization of truss structures using basic variable neighborhood search // Proceedings of the 8th International Congress of Croatian Society of Mechanics
Opatija, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
28.Tomac, Ivan; Lozina Željan; Sedlar DamirStrategy for Identification of Damping Ratio using Morlet Wave Damping Identification Method // Proceedings of ICoEV 2015 International Conference on Engineering Vibration / Boltežar, Miha ; Slavič, Janko ; Wiercigroch, Marian (ur.).
Ljubljana: National and University Library of Slovenia, 2015. str. 359-372 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
29.Tomac, IvanDetekcija modalnih parametara konstrukcija primjenom valne transformacije, 2013., doktorska disertacija, Fakultet elektrotehnike, strojarstva i brodogradnje, Split
-
30.Tomac, Ivan; Lozina, Željan; Sedlar, DamirSensitivity of the modal damping measurement on the vibration testing procedure // 30th DANUBIA-ADRIA / Alfirević, Ivo ; Semenski, Damir (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2013. str. 248-249 (poster, međunarodna recenzija, sažetak, znanstveni) -
31.Lozina, Željan; Sedlar, Damir; Vučina, DamirModel Update with Observer/Kalman Filter and Genetic Algorithm Approach // Transactions of FAMENA, 36 (2012), 2; 9-22 (međunarodna recenzija, članak, znanstveni)
-
32.Sapunar, KoviljkoPredviđanje elastičnog povrata kod savijanja limova metodom konačnih elemenata, 2012., diplomski rad, Fakultet elektrotehnike strojarstva i brodogradnje, Split
-
33.Sedlar, Damir; Lozina, Željan; Tomac, IvanExperimental detection of added mass of the beam partially immersed in a fluid using the system properties and expanded mode shape // 7. International Congress of Croatian Society of Mechanics / Virag, Zdravko ; Kozmar, Hrvoje ; Smojver, Ivica (ur.).
Zagreb: Studio HRG, 2012. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
34.Tomac, Ivan; Lozina, Željan; Sedlar, DamirEvaluation of Methods for Identification of Structural Damping Using Continuous Wavelet Transformation, Application to Numerical And Real Data // 7. International Congress of Croatian Society of Mechanics / Virag, Zdravko ; Kozmar, Hrvoje ; Smojver, Ivica (ur.).
Zagreb: Studio HRG, 2012. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
35.Sedlar, Damir; Lozina, Željan; Vučina, DamirAn implementation of structural change detection procedure based on experimental and numerical model correlation // Journal of sound and vibration, 331 (2012), 13; 3068-3082 doi:10.1016/j.jsv.2012.02.019 (međunarodna recenzija, članak, znanstveni)
-
36.Vučina, Damir; Lozina, Željan; Pehnec, IgorComputational procedure for optimum shape design based on chained Bezier surfaces parameterization // Engineering applications of artificial intelligence, 25 (2012), 3; 648-667 doi:10.1016/j.engappai.2011.11.007 (međunarodna recenzija, članak, znanstveni)
-
37.Vučina, Damir; Lozina, Željan; Pehnec, IgorAd-Hoc Cluster and Workflow for Parallel Implementation of Initial-Stage Evolutionary Optimum Design // Structural and multidisciplinary optimization, 45 (2012), 2; 197-222 doi:10.1007/s00158-011-0687-y (međunarodna recenzija, članak, znanstveni)
-
38.Cvitanić, Vedrana; Duplančić, Igor; Lozina, ŽeljanNumerical simulations of cup drawing for aluminium sheets based on asymmetric non-quadratic yield function and non-associated flow rule // Aluminium two thousand, 7th world congress / Walter Dalla Barba (ur.).
Modena, 2011. str. 25-38 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
39.Cvitanić, Vedrana; Duplančić, Igor; Lozina, Željan; Ivandić, DanielEaring predictions for Al2008-T4 sheet // AL Alluminio e Leghe, 3 (2011), 73-77 (podatak o recenziji nije dostupan, ostalo)
-
40.Tomac Ivan; Lozina Željan; Sedlar DamirOverview and Case Study Evaluation of the Time-Frequency Methods for the Estimation of Damping Ratio in Structures // Transactions of FAMENA, 35 (2011), 4; 35-64 (međunarodna recenzija, članak, znanstveni)
-
41.Sedlar, Damir; Lozina, Željan; Vučina, DamirExperimental investigation of the added mass of the cantilever beam partially submerged in water // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2011), 4; 589-594 (međunarodna recenzija, članak, znanstveni)
-
42.Čučić, Vladislav; Sedlar, Damir; Lozina, ŽeljanIdentification of mechanical system for non-destructive testing // International Conference on Non-Destructive Testing MATEST 2011 / Krnić, Nikša (ur.).
Split: Kartular, Split, 2011. str. 10-10 (ostalo, međunarodna recenzija, sažetak, znanstveni) -
43.Lozina, Željan; Vučina, Damir; Sedlar, Damir; Tomac, Ivan; Karišik, Edin; Čučić, VladislavExperimental Vibration Testing and Nondestructive Testing // International Conference on Non-Destructive Testing MATEST 2011 / Krnić, Nikša (ur.).
Split: Kartular, Split, 2011. str. 19-19 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
44.Sedlar, Damir; Lozina, Željan; Vučina, DamirComparison of Genetic and Bees Algorithm in the Finite Element Model Update // Transactions of FAMENA, 35 (2011), 1; 1-12 (međunarodna recenzija, članak, znanstveni)
-
45.Lozina, Željan; Vučina, Damir; Sedlar, DamirAn assessment of the reliability of the inverse procedures in the structural change detection based on the residual force approach // IV European Congress on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering
Pariz, Francuska, 2010. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
46.Lozina, Željan; Tomac, Ivan; Vučina DamirModelling and simulation of the active vibration control by means of PI regulated electro-dynamic actuator and bond graph approach // Proceedings of the 7th EUROSIM Congress on Modelling and Simulation Vol.1: Book of Abstracts, Vol.2: Full Papers (CD) / Šnorek, Miroslav ; Buk, Zdeněk ; Čepek, Miroslav ; Drchal, Jan (ur.).
Prag: Czech technical university in Prague, 2010. str. 178-178 (ostalo, međunarodna recenzija, sažetak, znanstveni) -
47.Vučina, Damir; Lozina, Željan; Vlak, FraneNPV-based decision support in multi-objective design using evolutionary algorithms // Engineering applications of artificial intelligence, 23 (2010), 1; 48-60 doi:10.1016/j.engappai.2009.09.007 (međunarodna recenzija, članak, znanstveni)
-
48.Tomac, Ivan; Pehnec, Igor; Lozina, ŽeljanActive vibration control using PI regulated electro-dynamic actuator – bond graph approach // Advanced Ship Design for Pollution Prevention / Soares, C. Guedes ; Parunov, Joško (ur.).
London : Delhi: Taylor & Francis, 2010. str. 275-280 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
49.Sedlar, Damir; Lozina, Željan; Vučina, DamirDynamic analysis of structures partially submerged in water // Advanced Ship Design for Pollution Prevention / Soares, Guedes ; Parunov, Joško (ur.).
Leiden: CRC Press ; A.A. Balkema Publishers, 2010. str. 71-76 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
50.Salečić, MilenaAnaliza savijanja limova u kalup U-oblika metodom konačnih elemenata, 2009., diplomski rad, Fakultet elektrotehnike strojarstva i brodogradnje, Split
-
51.Sedlar, DamirDOPRINOS EKSPERIMENTALNOJ MODALNOJ ANALIZI U DETEKCIJI STRUKTURNIH PROMJENA I METODAMA TEMELJENIM NA OSTATKU SILE, 2009., doktorska disertacija, Fakultet elektrotehnike, strojarstva i brodogradnje, Split
-
52.Sedlar, Damir; Lozina, Željan; Vučina, DamirExperimental modal analysis and structural changes // 6th ICCSM Book of Abstracts / Smojver, Ivica ; Sorić, Jurica (ur.).
Zagreb, 2009. str. 109-109 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
53.Lozina, Željan; Vučina, Damir; Sedlar, DamirActive Vibration Control of Electro-Mechanical System With Step Excitation and Electromagnetic Actuator // Coupled Methods in Numerical Dynamics / Terze, Zdravko ; Lacor, Chris (ur.).
Zagreb, 2009. str. 345-353 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
54.Sedlar, Damir; Lozina, Željan; Vučina, DamirVirtual mass measurement of cantilever beam partially submerged in fluid // Coupled Methods in Numerical Dynamics / Terze, Zdravko ; Lacor, Chris (ur.).
Zagreb, 2009. str. 303-312 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
55.Vučina, Damir; Lozina, Željan; Pehnec, IgorCoupled Evolutionary Shape Optimization and Reverse Engineering in Product Design and Virtual Prototyping // Transactions on Systems, 8 (2009), 3; 390-399 (međunarodna recenzija, članak, znanstveni)
-
56.Vučina, Damir; Kegl, Marko; Lozina, ŽeljanWorkflow-based Evolutionary Shape Synthesis and Optimization // 6th International Congress of the Croatian Society of Mechanics, Proceedings
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
57.Vučina, Damir; Lozina, Željan; Pehnec, IgorReverse Engineering with Shape Optimization using Workflow-Based Computation and Distributed Computing // World Congress on Engineering- 2009 International Conference of Parallel and Distributed Computing / WCE (ur.).
London : Delhi: WCE- IAENG, 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
58.Vučina, Damir; Lozina, Željan; Pehnec, IgorCoupled Evolutionary Shape Optimization and Reverse Engineering in Rapid Product Design and Prototyping // Recent Advances in Evolutionary Computing, Int. Conf. on Evolutionary Computing EC'09 / N.Mastorakis, A.Croitoru, V.Balas, E.Son, V.Mladenov (ur.).
Prag: wseas press, 2009. str. 132-140 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
59.Lozina, Željan; Vučina, Damir; Sedlar, DamirProcjena funkcije frekvencijskog odziva iz operativnih podataka // Zbornik radova drugog susreta Hrvatskog društva za mehaniku / Marović, Pavap ; Galić, Mirela ; Krstulović-Opara, Lovre (ur.).
Split: Kartular d.o.o., 2008. str. 37-42 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
60.Pehnec, Igor; Vučina, Damir; Lozina, ŽeljanWorkflow - Based Shape Optimization of Airfoils and Blades using Chained Bezier Curves // ModeFRONTIER UM2008
Trst, Italija, 2008. (predavanje, cjeloviti rad (in extenso), znanstveni) -
61.Sedlar Damir, Zeljan Lozina, Damir VucinaThe inverse analysis and modal parameters identification using modeFRONTIER // TCN CAE 2008, International conference on simulation based engineering and science / Venice, Italy (ur.).
Mestre, Italija, 2008. str. 82-82 (predavanje, sažetak, ostalo) -
62.Ivan Tomac, Zeljan Lozina, Damir VucinaThe Inverse analysis and System identification using modeFRONTIER // ModeFRONTIER UM2008
Trst, Italija, 2008. (predavanje, pp prezentacija, znanstveni) -
63.Vuletin, Gordan; Lozina, Željan; Vučina, DamirIDENTIFICATION AND VALIDATION OF A LINEAR ELASTIC DYNAMIC SYSTEM MODEL IN WORKSHOP ENVIRONMENT // Transactions of FAMENA, 32 (2008), 2; 21-30 (međunarodna recenzija, članak, znanstveni)
-
64.Vučina, Damir; Lozina, Željan; Pehnec IgorGA-based Shape Optimization Using 2D and 3D Piecewise Bezier Parameterization // TCN CAE 2008, International Conference on Simulation Based Enginering and Sciences, Conference Proceedings / TCN CAE Italy (ur.).
Venecija: TCN CAE Italy, 2008. str. 1-5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
65.Sedlar, Damir; Lozina, Željan; Tomac, IvanIMPACT TEST AND MODAL ANALYSIS // 7th Youth Symposium on Experimental Solid Mechanics
Wojcieszyce, 2008. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
66.Sedlar, Damir; Lozina, Željan; Tomac, IvanNumerical simulation of frequency response functions // I International Interdisciplinary Technical Conference of Young Scientists, InterTech 2008 / Rydlichowski P., Kliks A., Sroka P. (ur.).
Poznań: Uczelniany Samorzad Doktorantow Politechniki Poznanskiej, 2008. str. 252-255 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
67.Sedlar, Damir; Lozina, Željan; Tomac, IvanNumerical and Experimental Beam Analysis // X. International Conference on the Theory of Machines and Mechanisms : proceedings / Bilek, M. (ur.).
Liberec: Technical University, 2008. str. 531-536 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
68.Vučina, Damir; Lozina, Željan; Pehnec, IgorA Compact Parameterization for Shape Optimization of Aerofoils // World Congress on Engineering 2008 Proceedings / Iaeng (ur.).
London : Delhi: International Association of Engineers, 2008. str. 111-116 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
69.Vucina, Damir; Lozina, Zeljan; Pehnec, IgorA Compact Parameterization for Shape Optimization of Aerofoils // Zbornik radova: WCE 2008 ICCIIS International Conference of Computational Intelligence and Intelligent Systems, London 2008, proceedings,
London, Ujedinjeno Kraljevstvo, 2008. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
70.Cvitanić, Vedrana; Vlak, Frane; Lozina, ŽeljanA finite element formulation based on non-associated plasticity for sheet metal forming // International Journal of Plasticity, 24 (2008), 4; 646-687 doi:10.1016/j.ijplas.2007.07.003 (međunarodna recenzija, članak, znanstveni)
-
71.Cvitanić, Vedrana; Vlak, Frane; Lozina, ŽeljanAn analysis of non-associated plasticity formulations in deep drawing simulations // Transactions of FAMENA, 31 (2007), 2; 11-26 (međunarodna recenzija, članak, znanstveni)
-
72.Lozina Željan; Sedlar, Damir; Vlak, FraneNumerical Simulation and Experimental method in Structural Change Detection // 24th Danubia-Adria Symposium on Developments in Experimental Mechanics / Eberhardsteiner, Josef ; Eichlseder, Wilfried ; Semenski, Damir ; Alfirevic, Ivo ; Planicka, Frantisek ; Holy, Stanislav ; Borbas, Lajos ; Freddi, Alessandro ; Nicoletto, Gianni ; Dietrich, Lech ; Bedzinski, Romulad ; Pastrav, Ioan ; Iliescu, Nicolae ; Bencat, Jan ; Bokuvka, Otakar ; Palcek, Peter (ur.).
Sibiu: Universitatea, 2007. str. 127-128 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
73.Lozina, Željan; Vučina, Damir; Sedlar, DamirMODEL VALIDATION PROCEDURE AND DAMAGE DETECTION ALGORITHM BASED ON DYNAMIC PROPERTIES OF STRUCTURES // The 17th INTERNATIONAL DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Mechatronics & Robotics"
Beč, Austrija, 2006. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
74.Cvitanić, VedranaAnizotropni elasto-plastični model aluminijskih legura temeljen na nepridruženom pravilu tečenja, 2006., doktorska disertacija, Fakultet elektrotehnike, strojarstva i brodogradnje, Split
-
75.Cvitanić, Vedrana; Lozina, Željan; Vlak, FraneApplication of non-associated flow rule for sheet metal forming // Proceedings of the 5th International Congress of Croatian Society of Mechanics / Matejicek, Franjo (ur.).
Zagreb: CROATIAN SOCIETY OF MECHANICS, 2006. 169, 8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
76.Lozina, Željan; Vučina, Damir; Sedlar, DamirDYNAMIC PROPERTIES OF STRUCTURES AND ADVANCED ALGORITHMS FOR VALIDATION // Extended Abstracts of the 5th International Congress of Croatian Society of Mechanics / Matejicek, Franjo (ur.).
Zagreb: CROATIAN SOCIETY OF MECHANICS, 2006. str. 159-160 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
77.Vučina, Damir; Lozina, ŽeljanMultiobjective Design Optimization with Aggregate Fitness Function based on Total Lifecycle Cost // WSEAS Transactions on Systems, 5 (2006), 7; 1617-1625 (međunarodna recenzija, članak, znanstveni)
-
78.Vučina, Damir; Lozina, ŽeljanEvaluacija tehnologijskih projekata- priručnik i programska aplikacija za analizu projekata
Split: VN, 2006 -
79.Lozina, ŽeljanUvod u programiranje. Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2006 (monografija)
-
80.Vučina, Damir; Lozina, ŽeljanShape Optimization of Multilayer Sandwich Plates with Corrugated Cores // 6^th European Solid Mechanics Conference, ESMC 2006
Budimpešta, 2006. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
81.Lozina, ŽeljanDinamika. Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2005 (monografija)
-
82.Cvitanić, Vedrana; Vlak, Frane; Lozina, ŽeljanFinite Element Analysis of Cylinder Upsetting Problem using Elasto-plastic Material Model // ICIT 2005 / Kuzman, Karl (ur.).
Velenje: Tecos, 2005. str. 349-352 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
83.Tomac, IvanAnaliza torzijskih vibracija osovinskog voda, 2005., diplomski rad, Fakultet elektrotehnike strojarstva i brodogradnje, Split
-
84.Vučina, Damir; Lozina, ŽeljanOptimization Model for Aluminum Sandvich Plates with Corrugated Core // EUROGEN 2005 / Schilling, R. ; Haase, W. ; Periaux, J. ; Baier, H. ; Bugeda, G. (ur.).
München: FLM, München, 2005, 2005. str. v 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
85.Vučina, Damir; Lozina, Željan; Vlak, FraneOptimization of metal sandvich plates with corrugated core // International Journal for Engineering Modelling, 18 (2005), 1-2; 23-32 (međunarodna recenzija, članak, znanstveni)
-
86.Kozić, ViktorPlutajući pontoni za prihvat brodica, 2005., diplomski rad, Fakultet elektrotehnike strojarstva i brodogradnje, Split
-
87.Lozina, Željan; Vučina, DamirTeorija mehanizama
Split: VN, 2004 -
88.Duplančić, Igor; Lozina, Željan; Vučina, Damir; Kostović, DarPrediction Of Stresses And Strains Within Weld Pocket Dies During Extrusion Of Rectangular Solid Sections // Proceedings of 3rd DAAAM
Split, 2004. str. 113-118 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
89.Kostović, Dar; Lozina, ŽeljanA comparative analysis of analitical and numerical solutions for uniformly loaded cantilever beam subjected to large displacment // Proceedings of 3rd DAAAM
Split, 2004. str. 41-46 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
90.Duplančić, Igor; Lozina, Željan; Vučina, Damir; Kostović, DarPrediction of Stresses and Strains within Weld Pocket Dies during Extrusion of Rectangular Sections // 3rd DAAAM, Advanced technologies for Developing Countries / DAAAM (ur.).
Split: ATDC 2004, 2004. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
91.Vučina, Damir; Lozina, Željan; Duplančić, IgorProposed generic optimization model for metal sandvich plates during extrusion of thin walled solid sections // Advanced Technologies for Developing Countries
Split: ATDC'04, 2004. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
92.Duplančić, Igor; Lozina, Željan; Kostović, Dar; Prgin, Jere; Bračić ZoranNumerical Simulation of Behavior of Weld-Pocket Dies During Extrusion of Thin Walled Solid Section // Billet Process and Equipment Die Design and Technology Value-Added Processes
Orlando (FL): International Aluminum Extrusion Technology Seminar, 2004. str. 199-207 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
93.Lozina, Željan; Vlak, Frane; Sedlar, DamirDynamic analysis of constrained multibody systems // From Scientific Computing to Computational Engineering : proceedings
Atena, 2004. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
94.Lozina, Željan; Vlak, Frane; Sedlar, DamirDynamic analysis of flexible multibody systems // IX. International Conference on the Theory of Machines and Mechanisms "Theory of Machines and Mechanisms" : proceedings / Mrazek J. ; Bilek M. ; Kaniok J. ; Hartlova J. (ur.).
Liberec: Technical University of Liberec, 2004. str. 497-502 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
95.Jelaska, IgorIzrada aluminijskih sendvič panela, 2004., diplomski rad, Fakultet elektrotehnike strojarstva i brodogradnje, Split
-
96.Ujević, GoranIzrada i ispitivanje aluminijskih kompozita, 2004., diplomski rad, Fakultet elektrotehnike strojarstva i brodogradnje, Split
-
97.Lozina, ŽeljanKinematika. Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2003 (monografija)
-
98.Vlak, Frane; Cvitanić, Vedrana; Lozina, ŽeljanDynamic analyiss of multibody systems using constraint elimination methods // Proceedings of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. 171, 7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
99.Duplančić, Igor; Lozina, Željan; Vučina, Damir; Kostović, DarStress and Strain Analysis of Weld Pocket Dies During Extrusion of Thin Walled Solid Sections // 14th International Conference of DAAAM
Sarajevo: DAAAM, 2003. str. 131-132 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
100.Lozina, Željan; Duplančić, Igor; Lela, BranimirOptimization of aluminum extrusion and die design using neural networks and genetic algorithms // Aluminium Two Thousand
Rim, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
