Pregled po CROSBI profilu: Predrag Ćosić (CROSBI Profil: 20791, MBZ: 94833)

1.

Ćosić, Predrag; Keran, Zdenka; Kokot, Vedran

Selection of an Optimal Supplier // Tehnički glasnik - Technical journal, 14 (2020), 4; 531-539 doi:10.31803/tg-20201120120037 (međunarodna recenzija, članak, ostalo)

doi tehnickiglasnik.unin.hr hrcak.srce.hr

2.

Trstenjak, Maja; Ćosić, Predrag

Challenges of Human Resources Management with implementation of Industry 4.0 // IoTsm2018
London, Ujedinjeno Kraljevstvo, 2018. 87, 201 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

3.

Lusetic, Tajana; Trstenjak, Maja; Cosic, Predrag

Ergonomic Design of a Workplace // MOTSP2018 Conference Proceedings / Cosic, Predrag ; Trstenjak, Maja ; Baric, Gordana (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. 50, 7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

4.

Trstenjak, Maja; Cosic, Predrag

Lean Philosophy in the Digitalization Process // MOTSP2018 Conference Proceedings / Cosic, Predrag ; Trstenjak, Maja ; Baric, Gordana (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. 34, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

5.

Trstenjak, Maja; Cosic, Predrag

Industry 4.0 readiness factor criteria for the supply chain // Proceedings of XXII International conference on material handling, constructions and logistics, MHCL 2017
Beograd, 2017. 25, 5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

6.

Kušmišević, Matija; Trstenjak, Maja; Cosic, Predrag

Product lifecycle management through production of electromotor // MOTSP2017
Dubrovnik, Hrvatska, 2017. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

7.

Antonio Margarin; Maja Trstenjak; Predrag Cosic

Implementation PLM concept in simulation of production of an axial fan // MOTSP2017
Dubrovnik, Hrvatska, 2017. str. 30-35 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

8.

Trstenjak, Maja; Cosic, P.

Industry 4.0 readiness factor calculation - problem structuring // International Conference Management of Technology – Step to Sustainable Production (MOTSP 2017)
Dubrovnik, Hrvatska, 2017. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

motsp.org

9.

Trstenjak, Maja; Ćosić, Predrag

Process Planning in Industry 4.0 Environment // Procedia Manufacturing 11 / S.J. Hu (ur.).
Modena, Italija: Elsevier, 2017. str. 1744-1750 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

10.

Trstenjak, Maja; Ćosić, Predrag

Operation Sequencing Using Analytic Hierarchy Process // MOTSP2016
Poreč, Hrvatska, 2016. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

11.

Trstenjak, Maja; Ćosić, Predrag

Sequencing Of Single Product Operations With Multiple Technological Criteria // International Conference On Industrial Logistics, ICIL 2016
Zakopane, Poljska, 2016. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

12.

Tošić, Marina; Ćosić, Predrag

Reverse algorithm for determining the number of cutting passes and cutting conditions in axial turning // Tehnički Vjesnik - Technical Gazette, 23 (2016), 1139-1153 doi:10.17559/TV-20140117104145 (podatak o recenziji nije dostupan, prethodno priopćenje, ostalo)

doi

13.

Trstenjak, Maja; Ćosić, Predrag

NEW MACHINES SELECTION TOOLS USING ANALYTIC HIERARCHY PROCESS // Proceedings of 7th International Scientific Conference Management of Technology - Step to Sustainable Production, MOTSP2015, 10-12 June 2015, Brela, Makarska, Croatia / Editor-in-Chief Predrag Ćosić (ur.).
Zagreb: Croatian Association for PLM (CAPLM), 2015. str. xx-yy (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

14.

Trstenjak, Maja; Ćosić, Predrag

Decision support for machine tools selection in process planning and equipment investment // Proceedings of the 25th International Conference on Flexible Automation and Intelligent Manufacturing / ChikeF. Oduoza, CEng, FIChemE (ur.).
Wolverhampton, UK: University of Wolverhampton, UK, 2015. str. 266-273 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

15.

Ćosić, Predrag

Machine Tools Selection Using AHP Method and Multiobjective Optimization // 2nd International Scientific Conference COMETa2014 Conference on Mechanical Engineering Technology and Application Proceedings / Marković, Biljana ; Antunović, Ranko ; Kraišnik, Milija (ur.).
Sarajevo: Univerzitet u Istočnom Sarajevu, Mašinski fakultet Istočno Sarajevo, 2014. str. 17-24 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)

Pristup cjelovitom tekstu rada

16.

CEROVŠEK1, Katarina; ĆOSIĆ, Predrag

MACHINE TOOLS SELECTION IN PROCESS PLANNING USING THE AHP METHOD // Conference Proceedings MOTSP2014, 6th International Conference Management of Technology - Step to Susustainable Production / Ćosić, Predrag (ur.).
Zagreb: Croatian Association for PLM (CAPLM), 2014. str. xy-xz (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

17.

Tošić, Marina; Ćosić, Predrag

Development of a Decision Support System for Machine Selection // 5th International Scientific Conference Management of Technology - Step top Sustainable Production MOTSP2013 / Ćosić, Predrag (ur.).
Zagreb: Croatian Association for PLM CaPLM, 2013. str. x1-x6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

18.

Ćosić, Predrag; Lisjak, Dragutin; Milčić, Diana

Process and Production as a Part of Logistic Activities // VII Scientific Conference International Mechanical Engineering, COMEC 2012 / Angel Silvio Machado Rodriguez (ur.).
Santa Maria del Mar, Kuba: Central University of Las Villas, Cuba and the University Ottovon- Guericke of Magdeburg, Germany, 2012. str. x1-x2 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

19.

Ćosić, Predrag; Milčić, Diana; Pirović, Davor

Synergy of Process and Production Planning by Discrete Simulation in Manufacturing // FAIM 2012: Ferry Cruise Conference Helsinki-Stockholm-Helsinki, 10-13 June 2012 / Seppo Torvinen (ur.).
Tampere: University Tampere, 2012. str. x1-x2 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

20.

Tošić, Marina; Ćosić, Predrag

Reverse method for determining cutting operations in axial turning // Conference Proceedings of 4th International Scientific Conference Management of Technology Step to Sustainable Production 2012 / Predrag, Ćosić ; Barić, Gordana ; Tošić, Marina (ur.).
Zagreb: Croatian Association for PLM CaPLM, 2012. str. 167-174 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

21.

Mandić, Vesna; Erić, Dragan; Adamović, Dragan; Janjić, Mileta, Jurković, Zoran; Babić, Živko; Ćosić, Predrag

Concurrent Engineering Based on Virtual Manufacturing // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 885-892 (međunarodna recenzija, članak, znanstveni)

22.

Cajner, Hrvoje; Šakić, Nikola; Ćosić Predrag

IMPROVEMENT OF EXPERIMENTAL PLANS USING MULTI- CRITERIA APPROACH // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 3; 601-606 (međunarodna recenzija, članak, znanstveni)

23.

Cajner, Hrvoje; Šakić, Nikola; Ćosić, Predrag

DEFINITION OF NEW CRITERION IN DESIGN OF EXPERIMENTS BASED ON MODEL PRECISION // Management of Technology Step to Sustainable Production MOTSP2012 Conference Proceedings / Ćosić, Predrag (ur.).
Zagreb: Croatian Association for PLM, 2012. str. 145-151 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

24.

Opetuk, Tihomir; Ćosić, Predrag

Application of group technology for production time estimation // Transactions of FAMENA, 36 (2012), 3; 55-68 (recenziran, članak, stručni)

25.

Ćosić, Predrag

ESTIMATION OF PRODUCTION TIMES AS A PART OF DECISION SUPPORT // 11th International Conference on Automation Technology, National Yunlin University of Science and Technology (YunTech), Douliu, Taiwan, R.O.C. November 18-20, 2011.
Douliu, Tajvan, 2011. (plenarno, međunarodna recenzija, pp prezentacija, znanstveni)

26.

ĆOSIĆ, Predrag; LISJAK, Dragutin; MILČIĆ, Diana

Process planning in developed knowledge database // 1st Regional Conference -Mechatronics in practice and Education MECH - CONF 2011 / Firstner (ur.).
Subotica, 2011. str. x1-x2 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)

Pristup cjelovitom tekstu rada

27.

PIROVIC, Davor; GUDLIN, Mihael; ĆOSIĆ, Predrag

Implementation of Genetic Algorithm as the Part of Dicrete Simulation in Production Planning // Proceedings of 1st Regional Conference - Mechatronics in Practice and Education MECH - CONF 2011 / Firtstner (ur.).
Subotica, 2011. str. x1-x2 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

28.

Ćosić, Predrag; Lisjak, Dragutin; Latin, Valentina

Multiobjective Optimization - Possibility for Production Improvement // 34th International Conference on Production Engineering, Proceedings, Proizvodno mašinstvo / Trajanović, Miroslav (ur.).
Niš: Univerzitet u Nišu, 2011. str. 125-128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

29.

Ćosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

Estimation of Production Time by Regression and Neural Networks // 3rdInternational Scientific Conference, Management of Technology - Step to Sustainable Production MOTSP2011, 8-10 June 2011, Bol, Island Brac, Croatia, Conference Proceedings / Ćosić, Predrag (ur.).
Zagreb: Printera grupa d.o.o., 2011. str. 243-250 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

30.

Lisjak, Dragutin; Ćosić, Predrag; Milčić, Diana

Two approaches for estimation of production time : robust regression analysis and neural network // Proceedings of the 21st International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2011) / F. Frank Chen ; Yi-Chi Wang (ur.).
Taichung: FAIM 2011 and Society of Lean Enterprise Systems of Taiwan, 2011. str. 27-34 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

31.

Mandić, Vesna; Ćosić, Predrag

Integrated Product and Proces Development in Collaborative Virtual Engineering Environment // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2011), 3; 369-378 (međunarodna recenzija, članak, znanstveni)

32.

Gečevska, Valentina; Chiabert, Paolo; Čuš, Franc; Anisic, Zoran; Veža, Ivica; Ćosić, Predrag

Education in product lifecycle management new innovative and competitive knowledge concept // 3rd International Scientific Conference Management of Technology Step to Sustainable Production (MOTSP 2011) : conference proceedings / Ćosić, Predrag ; Đukić, Goran ; Barić, Gordana (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2011. str. 613-624 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

33.

Čosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

Multiobjective Optimization : Support In Production Improvement // Conference "Advances in Materials and Processing Technologies" (AMPT2010) : Proceedings
Pariz, 2010. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

34.

Čosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

Multiobjective optimization in process planning // 20th International conference flexible automation and intelligent manufacturing : proceedings
San Francisco (CA), 2010. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

35.

Ćosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

Investigation of Using Multicriteria Optimization in Process Planning // 2nd International Scientific Conference Management of Technology "Step to Sustainable Production" : Conference Proceedings / Ćosić, Predrag (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2010. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

36.

Gečevska, Valentina; Lombardi, Franco; Čuš, Franc; Anišić, Zoran; Angelidis, Demos; Veža, Ivica; Popovska, Vasilevska, Sanja; Ćosić, Predrag

PLM-Product Lifecycle Management Strategy for Innovative and Competitive Business Environment // Innovative Production Systems Key to Future Intelligent Manufaturing / Čuš, Franc ; Gečevska, Valentina (ur.).
Maribor: Univerza v Mariboru, 2010. str. 193-208

37.

Ćosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

Using Multicriteria Optimization in Process Planning // 3rd International Conference for Entrepreneurship, Innovation and Regional Development (ICEIRD2010) : proceedings / Zoran, Anišić (ur.).
Novi Sad: Faculty of technical sciences, Department for Industrial Engineering and Management, UNESCO Chair in Entrepreneurial Studies & CISCO Entrepreneur Institute, Training Centre Serbia,, 2010. str. 140-147 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

38.

Gecevska, Valentina; F. Lombardi, Franco; Cus, Franc; Angelides, Dameliges; Anisic, Zoran; Veza, Ivica; Ćosić, Predrag

PLM Concept – Innovative View in Engineering Education, 01-04.03.2010., str. 304-308. // Zbornik radova, XVI Skup Trendovi razvoja, Zbornik radova, Kopaonik, Konaci Sunčani vrhovi, 01-04.03.2010. / Vladimir Katić (ur.).
Lahti: FTN, Novi Sad, 2010. str. 304-308 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

39.

Ćosić, Predrag; Volarević, Nikola

Some aspects of process planning improvement // Proceedings ICIL, 18 (2010), 323-330 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

40.

Ćosić, Predrag; Babić, Anita; Antolić, Dražen

Process Selection, Sequence of Operations and Shape Complexity : Criteria for Process Improvement // Strojarstvo, 52 (2010), 1; 5-15 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

41.

Ćosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

The Iterative multiobjective method in optimization process planning // Tehnički vjesnik, 17 (2010), 1; 75-81 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada

42.

Ćosić, Predrag; Milčić, Diana

Primary process selection : step to intelligent manufacturing // 20th International Conference of production tresearch (ICPR) : proceedings / Bullinger, Hans-Joerg (ur.).
Shanghai: Association of Production Research, 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

43.

Ćosić, Predrag

Production time estimation of part : from shape complexity to sequencing of operations, regression and cam // Intelligent production systems way to competitiveness and innovative engineering / Gečevska, Valentina ; Čuš, Franc (ur.).
Skopje : Maribor: Mašinski fakultet Univerziteta Sv. Kiril i Metodij u Skopju ; Fakulteta za strojništvo Univerze v Mariboru, 2009. str. 133-142

Pristup cjelovitom tekstu rada

44.

Predrag Ćosić

Production Time Estimation of Part From Shape Complexity to Sequencing of Operations, Regression and CAM // Intelligent Production Systems Way to Competitiveness / Balič, Jože (ur.).
Skopje: Fakulteta za strojništvo Univerze v Mariboru ; Mašinski fakultet Univerziteta Sv. Kiril i Metodij u Skopju, 2009. str. 133-142

Pristup cjelovitom tekstu rada

45.

Ćosić, Predrag; Glumpak, Ivica

Application of the LCA method supported by ISO norms // Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM symposium Intelligent Manufacturing and Eeducation / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2009. str. 1689-1690 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

46.

Ćosić, Predrag; Dolinšek, Slavko; Gečevska Valentina

Primary process selection as the part of process planning // Intelligent production systems way to competitiveness and innovative engineering / Gečevska, Valentina ; Čuš, Franc (ur.).
Skopje : Maribor: Mašinski fakultet Univerziteta Sv. Kiril i Metodij u Skopju ; Fakulteta za strojništvo Univerze v Mariboru, 2009. str. 229-239

Pristup cjelovitom tekstu rada

47.

Babić, Anita; Belošević, Goran; Stjepanovič, Goran; Ćosić, Predrag

Sequence operations and process planning : criteria for process improvement // International Scientific Conference Management of Technology – Step to Sustainable Production (MOTSP 2009) : Conference Proceedings / Ćosić, Predrag ; Dolinšek, Slavko ; Đukić, Goran ; Barić, Gordana (ur.).
Zagreb : Koper: Faculty of Mechanical Engineering and Naval Architecture ; Faculty of Management, University of Primorska, 2009. str. 21-26 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

48.

Glumpak, Ivica; Ćosić, Predrag

How EU norms can improve application of the LCA method in practice // International Scientific Conference Management of Technology – Step to Sustainable Production (MOTSP 2010) : Conference Proceedings / Ćosić, Predrag ; Dolinšek, Slavko ; Đukić, Goran ; Barić, Gordana (ur.).
Zagreb : Koper: Faculty of Mechanical Engineering and Naval Architecture ; Faculty of Management, University of Primorska, 2009. str. 262-267 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

49.

Ćosić, Predrag; Glumpak, Ivica

Improvement application of the LCA method in practice // Annals of the Faculty of Engineering Hunedoara, 7 (2009), 2; 217-222 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada annals.fih.upt.ro

50.

Ćosić, Predrag; Babić, Anita; Belošević, Ivan

Process Planning by Web Application - Criteria for Process Improvement // Annals of the Faculty of Engineering Hunedoara, 7 (2009), 2; 171-176 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada http

51.

Opetuk, Tihomir; Ćosić, Predrag

The Application of Group Technology for the Production Time Estimation // Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium / B. Katalinic (ur.).
Beč: DAAAM International Vienna, 2008. str. 0991-0992 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

52.

Opetuk, Tihomir

Razvoj modela za procjenu vremena izrade rotacijskih dijelova, 2008., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb

53.

Opetuk, Tihomir; Predrag, Ćosić

Mogućnost procijene vremena izrade rotacijskih dijelova // Techno-Educa 2008 zbornik radova / Darko Petković (ur.).
Zenica, 2008. str. 176-186 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

54.

Ćosić, Predrag

Primary process selection and process sequencing as the part of process planning // 12th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology (TMT 2008) : Proceedings, / Ekinović, Sabahudin (ur.).
Zenica : Barcelona : Antalya: Faculty of Mechanical Engineering ; Universitat Politecnica de Catalunya ; Mühendislik Fakültesi, 2008. str. x-x (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

55.

Ćosić, Predrag; Dolinšek, Slavko; Gečevska, Valentina

Odabir primarnog procesa kao dio planiranja tehnoloških procesa // 13. savjetovanje o materijalima, tehnologijama, trenju i trošenju (MATRIB 2008) : : zbornik sažetaka = abstracts book / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2008. str. 14-14 (predavanje, međunarodna recenzija, sažetak, stručni)

Pristup cjelovitom tekstu rada

56.

Ćosić, Predrag; Antolić, Dražen; Oluić, Čedomir

Production Time Estimation as the Part of Distributed Manufacturing // Eight International Conference on Advanced Manufacturing Systems and Technology Proceedings (AMST'08) : Conference proceedings / Kuljanić, Elso (ur.).
Udine: CISM, International Centre for Mechanical Sciences, 2008. str. 315-326 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

57.

Donevski, Davor; Milčić, Diana; Banić, Dubravko; Ćosić, Predrag

Implementation of tqm in the print production processes // International Conference on Industrial Logistics (ICIL 2008) : abstracts / Menipaz, Ehud ; Ben-Gal, Irad ; Bukchin, Yossi (ur.).
Tel Aviv, 2008. str. 298-298 (predavanje, međunarodna recenzija, sažetak, znanstveni)

58.

Ćosić, Predrag; Milčić, Diana; Kovačić, Ivan

Production Time Estimation as the Part of Collaborative Virtual Manufacturing // International Conference on Industrial Logistics (ICIL 2008) : Book of Proceedings / Menipaz, Ehud ; Ben-Gal, Irad ; Bukchin, Yossi (ur.).
Tel Aviv: ICIL, 2008. str. 93-100 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

59.

Opetuk, Tihomir

Primjena skupnih tehnologija u projektiranju tehnoloških procesa, 2007., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb

60.

Ćosić, Predrag; Antolić, Dražen; Milić, Igor

Web oriented sequence operations // Proceedings of the 19th International Conference on Production Research "The Development of Collaborative Production and Service Systems in Emergent Economics" / Ceroni, Jose (ur.).
Valparaíso: School of Inbdustrial Engineering, Pontifical Catholic University of Valparaiso, 2007. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)

Pristup cjelovitom tekstu rada

61.

Ćosić, Predrag; Antolić, Dražen

Fast process planning : one of the criteria for better competitiveness // Proceedings of the Global Conference on Production and Industrial Engineering (CPIE-2007) / Bhardwaj, Arvinf ; Gupta, Ajay ; Bedi, Raman ; Sharma, Vishal S (ur.).
Jalandhar: Excel India Publishers, 2007. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

62.

Ćosić, Predrag; Đukić, Goran; Karašić, Marko

Comprehension and Applicability of LCA/LCM Philosophy – One of the Criteria for Better Competitiveness // 11th International research/Expert Conference ''Trends in the Development of Machinery and Associated Technology'', TMT 2007 Proceedings / Ekinovic, S ; Yalcin, S. ; Vivancos, J. (ur.).
Hammamet: Faculty of Mechanical Engineering in Zenica ; Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Universitat Politecnica de Catalunya, Spain ; Bahçeşehir University Istambul, Mühendislik Fakültesi, Turky, 2007. str. 495-498 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

63.

Dolinšek, Slavko; Janeš, Aleksander; Ćosić, Predrag; Ekinović, Sabahudin

Development of the Technology Audit Model // Managing Global Transitions: Globalisation, Localisation, Regionalisation / Žižmond, Egon (ur.).
Portorož: Faculty of Management, University of Primorska, Koper, 2007. str. xx-yy (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

64.

Ćosić, Predrag; Antolić Dražen; Gečevska, Valentina

Fast Estimation of Production Times as the Decision Support for Delivery Times and Production Costs // Mechanical Engineering Scientific Journal (Skopje), 26 (2007), 1; 87-96 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

65.

Ćosić, Predrag; Antolić, Dražen

Features of the sketch : base for the fast process planning // Abstracts of the ICEE-2007 & nPEC-5 PSU-UNS International Conference on Engineering and Environment & The 5th PSU Engineering Conference
Phuket, 2007. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

66.

Ćosić, Predrag; Antolić, Dražen; Milić, Igor

WEB oriented sequence operations // 19th International Conference on Production Research (ICPR-19) : CD proceedings
Valparaíso, 2007. str. xx-yy (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

67.

Ćosić, Predrag; Antolić, Dražen

Fast estimataion of production times as the basis for costs and deadline of delivery // Techno-Educa 2007 : Abstracts
Zenica, Bosna i Hercegovina, 2007. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

68.

ĆOSIĆ, Predrag; ANTOLIĆ, Dražen

FAST PROCESS PLANNING – ONE OF THE CRITERIA FOR BETTER COMPETITIVENESS // Abstracts Booklet Global Conference on Production and Industrial Engineering, CPI-2007, March 22-24, 2007 / Bhardwaj, A. ; Gupta, A. ; Bedi, R. ; Sharma, Vishal s. (ur.).
Jalandhar: Dr. B R Ambedkar National Institute of Technology, 2007. str. 106-106 (predavanje, međunarodna recenzija, sažetak, znanstveni)

Pristup cjelovitom tekstu rada

69.

Babić, Anita; Belošević, Ivan; Stjepanovic, Goran; Ćosić, Predrag

Development of WEB process planning application – E-LAPP // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM INternational Vienna, TU Wien, 2007. str. 033-034 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

70.

Ćosić, Predrag; Đukić, Goran; Karašić, M.

Comprehension and applicability of LCA/LCM philosophy – one of the criteria for better competitiveness // 11th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" (TMT 2007) : Proceedings / Ekinović, S., Yalcin, S., Vivancos, J. (ur.).
Zenica : Barcelona : Istanbul: Faculty of Mechanical Engineering ; Escola Tecnica Superior D'Enginyeria Industrial de Barcelona ; Mühendislik Fakültes, 2007. str. 495-498 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

71.

Antolić, Dražen; Ćosić, Predrag; Dolinšek, Slavko

Operation Sequencing as the Decision Basis for the Fast Process Planning // 11th International Scientific Conference on Production Engineering CIM 2007 / Abele, E., Udiljak, T., Ciglar, D. (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, Zagreb, 2007. str. 53-60 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

72.

Ćosić, Predrag

Planiranje procesa u web okruženju // Napredne proizvodne tehnologije / Balič, Jože ; Veža, Ivica ; Čuš, Franci Čuš (ur.).
Maribor : Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2007. str. 59-96

Pristup cjelovitom tekstu rada

73.

Ćosić, Predrag; Volarević, Nikola

Variants of Production : Improvement of Process Planning // 9th International Research/Expert Conference on Trends in the Development of Machinery and Associated Technology (TMT 2005): proceedings / Ekinović, Sabahudin ; Yalcin, Senay ; Vivancos Calvet, Joan (ur.).
Zenica: Faculty of Mechanical Engineering, 2005. str. 457-460 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

74.

Volarević, Nikola; Ćosić, Predrag

Shape complexity measure study // Annals of DAAAM for 2005 & PROCEEDINGS of the 16th International DAAAM Symposium "Intelligent Manufacturing & Automation : Focus on Young Researches and Scientests" / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2005. str. 375-376 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

75.

Ćosić, Predrag; Levanić, Andrija

Web Oriented Database System for Process Planning // 8th Pacific Congress on Manufacturing and Management, 2004 / Sam Salem (ur.).
Lahti: ISBN 0-9578296-1-2, 2004. str. 922-928 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

76.

Ćosić, Predrag; Levanić, Andrija; Kosić, Dragan

Internet Oriented Process Planning // ATDC'04 Proceedings the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Veža Ivica ; Bilić, Boženko (ur.).
Split: University of Split, FEMENA, DAAAM International Vienna, 2004. str. 217-223 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

77.

Ćosić, Predrag; Levanić, Andrija

Improving Process Planning through Costs Production // Manufacturing and Management in 21st Century / Dukovski, Vladimir ; Dudeski, Ljuben ; Polenakovik, Radmil ; Čaloska, Jasmina (ur.).
Skopje: Production and Industrial Engineering Association, 2004. str. 248-253 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

78.

Ćosić, Predrag; Levanić, Andrija

Variants of Machining and Production Costs // Annals of DAAAM for 2004 Proceedings / Katalinic, Branko (ur.).
Beč, Austrija: DAAAM International, Vienna, 2004. str. 085-086 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

79.

Ćosić, Predrag

Process planning improvement and e-education // 7th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" (TMT 2003) : proceedings / Ekinović, Sabahudin ; Vivancos Calvet, Joa (ur.).
Barcelona: Universitat Politecnica de Catalunya, Escola Tecnica Superior D'Engiunyeria Industrial de Barcelona, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

80.

Ćosić, Predrag; Cvjetićanin, Aleksandar

Production improvement as a result of the reengineering process // 14th DAAAM Internationa Symposium "Intelligent Manufacturing & Automation : Focus on Reconstruction and Development": proceedings / Branko, Katalinic (ur.).
Sarajevo: DAAAM International Vienna, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

81.

Ćosić, Predrag

Process Improvement: From Systematical Planning toward Decision Support Based on Fault Diagnosis // ICIT 2003, 4th International Conference on Industrial Tools / Kuzman, Karl (ur.).
Celje: TECOS, 2003. str. 453-456 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

82.

Ćosić, Predrag

Process planning between logical approach and CAPP // 6th International Research/Expert Conference "Trends in the Development of Machinery and Associated technology" (TMT 2002) : Proceedings / Brdarević, Safet ; Ekinović, Sabahudin ; Pascual, Ramon Compamys ; Calvet, Joan Vivancos (ur.).
Zenica: Faculty of Mechanical Engineering, 2002. str. 219-222 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

83.

Ćosić, Predrag

Systematization of the Process Planning Knowledge as the Necessary Step for CAPP Implementation // Annals of DAAAM for 2002 Proceedings, 13th International DAAAM Symposium ''Intelligent Manufacturing & Automation: Lerning from Nature'', Vienna University of Technology, 23-26.October 2002, Vienna, Austria, Europen Union / Branko, Katalinic (ur.).
Beč: DAAAM International Vienna, Vienna 2002, 2002. str. 107-108 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

84.

Ćosić, Predrag; Sever, Danijela; Milinović, Saša

Process Planning Application and Internet Connection // 6th International Conference on Advanced Manufacturing Systems and Technology Proceedings (AMST'02) : proceedings / Kuljanić, Elso (ur.).
Beč : New York (NY): Springer, 2002. str. 283-290 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

85.

Ćosić, Predrag; Sever, Danijela; Milinovic, Saša

Contribution to Systematized Approach of Process Planning // 8th International Scientific Conference on Production Engineering, CIM 2002 / Roko, Cebalo & Herbert Schulz (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2002. str. III013- III023 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

86.

Ćosić, Predrag

Decision support for the fault diagnosis of deep drawing // ICPR-16 / D. Hanus, J, Talacko (ur.).
Prag: Czech Association of Scientific and Technical Societes, 2001. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

87.

Ćosić, Predrag; Sever, Danijela; Milinović, Saša

Internet based application for the process planning // Annals of DAAAM for 2001 & Proceedings / Branko, Katalinić (ur.).
Beč: DAAAM International, Vienns, Austria 2001, 2001. str. 081-082 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

88.

Ćosić, Predrag

Decision Support for the Fault Diagnossis-Possibility of Deep Drawing Reengineering // CARS & FOF 2001 / Glen, Bright & Wendy, Janssens (ur.).
Durban: The Mechatronics and Robotics Research Group, Univ. of Natal, 2001. str. 137-143 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

89.

Ćosić, Predrag; Milinović, Saša; Sever, Danijela

Data-Based System for Process Planning // Computer Intergrated Manufacturing and High Speed Machining / Roko, Cebalo ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. III002-III012 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

90.

Ćosić, Predrag

Dyagnosis System for the Elimination the Observed Faults During Deep Drawing // Conference Proceedings MATRIB 2000 / Krešimir, Grilec (ur.).
Zagreb: Croatian Society for Materials and Tribology c/o FSB, Zagreb, 2000. str. 73-78 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

91.

Ćosić, Predrag

Using Fuzzy Variables for the Improvement of Deep Drawing Technology // 11th DAAAM International Symposium Annals of DAAAM International 2000, ''Intelligent Manufacturing & Automation: Man-Machine-Nature'' / B. Katalinic (ur.).
Opatija: DAAAM INternational Vienna, 2000. str. 087-088 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

92.

Šakić, Nikola; Oluić, Čedomir; Čala, Ivo; Ćosić, Predrag; Bosnar, Ronald; Roketinec, Ivica; Dubravec, Irena; Đukić, Goran

Informacijski sustavi proizvodnje // EGE : energetika, gospodarstvo, ekologija, etika, 5 (1999), 99; 120-121 (podatak o recenziji nije dostupan, pregledni rad, stručni)

93.

Ćosić, Predrag

Kritičko razmatranje primjene genetičkog algoritma pri optimizaciji kontaktnog valjanja ultra tankih al- folija, 1998. (podatak o recenziji nije dostupan, ostali članci/prilozi).

94.

Ćosić, Predrag

Critical Consideration of the Possibility to use Genetic Algorithm for Ultra Thin Al-Foil Contact Rolling Optimization // The 14th International Conference on Production Resarch, 14th ICPR / Takaya, Ichimura (ur.).
Osaka: The 60th Anniveristy Memorial Halls Osaka Institute of Technolog, 1997. str. 802-805 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

95.

Ćosić, Predrag

Using Genetic Algorithm of Ultra Thin Foil Contact Rolling Optimizing : Expectations and Possibilities // 4th International Conference on Production Engineering Computer Integrated Manufacturing and Hight Speed Machining (CIM ’97) : zbornik radova / Roko, Cebalo, Roko (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 1997. str. A11-A19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

96.

Ćosić, Predrag

An Expert System for the Fault Diagnosis of Deep Drawing // Proceedings 13th CONFERENCE BIAM '96 / Božo Vranješ (ur.).
Zagreb: KoREMA, Unska 3, Zagreb, 1996. str. K29-K32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

97.

Ćosić, Predrag

Development of Expert System for Fault Detection in Metal Forming // AMST '96 ADVANCED MANUFACTURING SYSTEMS AND TECHNOLOGY / E. Kuljanic (ur.).
Beč : New York (NY): Springer Wiwen New York, 1996. str. 831-838 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

98.

Ćosić Predrag

An Expert System for the Fault Diagnosis of Deep Drawing // Proceedings 13th Conference BIAM '96 / Vranješ, Božo (ur.).
Zagreb: KoREMA, Unska 3, Zagreb, 1996. str. K29-K32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

99.

Ćosić, Predrag

Primjer razvoja ekspertnog sustava u obradi deformiranjem // 4.skup KONSTRUIRANJE 96, 4th Symposium DESIGN 96 / Križan, Božidar (ur.).
Opatija: Tehnički fakultet Sveučilišta u Rijeci, 1996. str. 11-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

100.

Ćosić, Predrag

Analiza algoritma kontaktnog valjanja // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 37 (1995), 3-4; 109-117 (međunarodna recenzija, članak, znanstveni)