Pregled po CROSBI profilu: Darko Landek (CROSBI Profil: 15941, MBZ: 213574)
Pronađeno 211 radova
-
101.Influence of quenching in water based nanofluid on quench distortions in long cylinders // Proceedings of the 5th International Conference on DISTORTION ENGINEERING / Hans-Werner Zoch, Thomas Lübben (ur.).
Bremen: Stiftung Institut für Werkstofftechnik, 2015. str. 271-278 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
102.Ispitivanje utjecaja ultrazvučne pobude tekućeg sredstva za gašenje na deformacije kaljenog valjka od čelika C45, 2015., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
103.Ispitivanje otpornosti na abrazijsko trošenje tvrdih prevlaka proizvedenih PACVD postupkom, 2015., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
104.Ispitivanje utjecaja prevlačenja PACVD postupkom na promjenu površinske hrapavosti i topografije površine, 2015., diplomski rad, preddiplomski, Fakultet strojarstva i brodogardnje, Zagreb
-
105.Introduction and application of new tehnologies of plasma nitriding and PACVD coating // The Proceedings of the 5th International Conference „Mechanical Technologies and Structural Materials
Split, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
106.Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel // Engineering Materials and Tribology / Hussainova, Irina ; Veinthal, Renno (ur.).
Talin, Estonija, 2015. str. 257-262 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
107.Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel // Key Engineering Materials, 674 (2015), 257-262 (međunarodna recenzija, članak, znanstveni)
-
108.Microstructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel // Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Venecija: Associazone Italiana di Metallurgia, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
109.Wear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel // Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Milano: Associazone Italiana di Metallurgia, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
110.Utjecaj načina gašenja i dubokog hlađenja na popuštanje čelika K490 MICROCLEAN, 2014., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
111.Selection of Optimal Conditions for Immersion Quenching // Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas (ur.).
München: Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014. str. 187-196 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
112.Analysis of the quenching oil's cooling curves with agitation and with addition of nanoparticles // Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas (ur.).
München: Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014. str. 253-260 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
113.Cooling characteristics of water based nanofluids with agitation // Materials performance and characterization, 3 (2014), 4; 326-336 doi:10.1520/MPC20140019 (međunarodna recenzija, članak, znanstveni)
-
114.Current Investigations at Quenching Research Centre // Materials performance and characterization, 3 (2014), 4; 3-18 doi:10.1520/MPC20130102 (međunarodna recenzija, pregledni rad, znanstveni)
-
115.Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling // Materials performance and characterization, 3 (2014), 4; 99-117 doi:10.1520/MPC20140005 (međunarodna recenzija, članak, znanstveni)
-
116.A Prediction of Quenching Parameters Using Inverse Analysis // Materials performance and characterization, 3 (2014), 4. doi:10.1520/MPC20130109 (međunarodna recenzija, članak, znanstveni)
-
117.Tribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel // Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas (ur.).
München: Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014. str. 459-466 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
118.Characteristics of Warm Baths for the quenching of Tool Steels // Conference Proceedings of 9th International Conference on Industrial Tools and Material Processing Technologies / Hančič, Aleš ; Grum, Janez ; Gantar, Gašper ; Pulko, Irena (ur.).
Ljubljana: TECOS – Slovenian Tool and Die Development Center, 2014. str. 207-214 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
119.Effect of Application of Deep-cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC // Conference Proceedings of 9th International Conference on Industrial Tools and Material Processing Technologies / Hančič, Aleš ; Grum, Janez ; Gantar, Gašper ; Pulko, Irena (ur.).
Ljubljana: TECOS – Slovenian Tool and Die Development Center, 2014. str. 191-196 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
120.Usporedba postupaka plinskog nitriranja i nitrokarburiranja, 2013., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
121.Ispitivanje deformacija kaljenih valjaka od čelika 90MnCrV8, 2013., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
122.Dilatometrijska analiza popuštanja brzoreznog čelika PM S390 MC, 2013., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
123.Ispitivanje prokaljivosti visokolegiranih alatnih čelika, 2013., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
124.Materijali i proizvodni postupci / Landek, Darko ; Šercer, Mladen ; Rujnić-Sokele, Maja (ur.).
Zagreb: Tehničko veleučilište u Zagrebu, 2013 -
125.Modeling of unavoidable residual stresses after transformation-free cooling // The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: CSHTSE, 2013. str. 367-374 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
