Pregled po CROSBI profilu: Dražen Bajić (CROSBI Profil: 14512, MBZ: 186194)
Pronađeno 102 radova
-
1.Dumanić, Ivana; Jozić, Sonja; Bagavac, Petra; Bajić, DraženOrthogonal cutting simulation of EN AW 6082 T6 alloy using a coupled Eulerian-Lagrangian approach // Heliyon, online first (2023), 1-21 doi:10.1016/j.heliyon.2023.e14821 (međunarodna recenzija, članak, znanstveni)
-
2.Celent, Luka; Bajić, Dražen; Jozić, Sonja; Mladineo, MarkoHard Milling Process Based on Compressed Cold Air- Cooling Using Vortex Tube for Sustainable and Smart Manufacturing // Machines, 11 (2023), 2; 264, 25 doi:10.3390/machines11020264 (međunarodna recenzija, članak, znanstveni)
-
3.Jozić, Sonja; Lela, Branimir; Bajić, DraženCONTRIBUTION TO SUSTAINABILITY BY RECYCLING ALUMINUM ALLOY CHIPS // -
Bratislava, Slovačka, 2022. str. - (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni) -
4.Igor Ćulum; Ivana Dumanić; Sonja Jozić; Dražen Bajić; Branimir LelaInfluence of cutting parameters on cutting forces and surface roughness in milling of aluminum foam // Mechanical Technologies and Structural Materials, MTSM2022
Split, Hrvatska, 2022. str. 21-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Jozić, Sonja; Bajić, Dražen; Dumanić, Ivana; Ljuba, BrigitaSelection of optimal die casting process parameters based on simulation and genetic algorithms // Mechanical Technologies and Structural Materials, MTSM2022 / Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, Hrvatska, 2022. str. 65-70 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
6.Vrsalovic, Ladislav; Gudić, Senka; Krolo, Jure; Lela, Branimir; Jozić, Sonja; Bajić, Dražen; Grgić, KarlaCorrosion behavior of Al foams in 0.5 M NaCl solution // 22th International Conference on Materials, Tribology and Recycling - MATRIB 2022 / Bušić, Matija ; Leder Horina, Jasna ; Tropša, Vlado (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2022. str. 431-440 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Jozić, Sonja; Vrsalović, Ladislav; Bajić, Dražen; Gudić, SenkaInvestigation of different cutting conditions in the machining of steel — towards cleaner production // Journal of cleaner production, 356 (2022), 131881, 9 doi:10.1016/j.jclepro.2022.131881 (međunarodna recenzija, članak, znanstveni)
-
8.Jozić, Sonja; Bajić, Dražen; Dumanić, Ivana; Bagavac, ŽeljkoOptimization for an efficient and highly productive turning process // Reports in Mechanical Engineering, 2 (2021), 1; 212-221 doi:10.31181/rme2001021212j (međunarodna recenzija, članak, znanstveni)
-
9.Dumanić Ivana, Jozić Sonja, Bajić DraženSIMULATION OF REAL IMAGE MICROSTRUCTURAL MODEL OF SEMI-SOLID ALUMINIUM ALLOY USING A COUPLED EULERIAN–LAGRANGIAN APPROACH // International Journal of Metalcasting, online first (2021), 1-11 (međunarodna recenzija, članak, znanstveni)
-
10.Dumanić, Ivana; Jozić, Sonja; Bajić, Dražen; Krolo, JureOptimization of Semi-solid High- Pressure Die Casting Process by Computer Simulation, Taguchi Method and Grey Relational Analysis // International Journal of Metalcasting, 15 (2021), 1; 108-118 doi:10.1007/s40962-020-00422-5 (međunarodna recenzija, članak, znanstveni)
-
11.Jozić, Sonja; Dumanić, Ivana; Bajić, DraženExperimental analysis and optimization of the controllable parameters in turning of en aw-2011 alloy; dry machining and alternative cooling techniques // Facta Universitatis. Series: mechanical engineering, 17 (2020), 1; 13-29 doi:10.22190/FUME191024009J (međunarodna recenzija, članak, znanstveni)
-
12.Jozić, Sonja; Bajić, Dražen; Dumanić, IvanaInfluence of Processing Parameters on the Performances of High Pressure Die Casting Process // International Journal of Engineering Research and Development, 15 (2019), 4; 52-58 (međunarodna recenzija, članak, znanstveni)
-
13.Jozić, Sonja; Bajić, Dražen; Krolo, Jure; Perić, TomislavDie for Equal Channel Angular Pressing (ECAP) process: Design and Manufacturing // Mechanical Technologies and Structural Material MTSM2019 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian Society for Mechanical Technologies, 2019. str. 97-102 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
14.Dumanić, Ivana; Krolo, Jure; Jozić, Sonja; Lela, Branimir; Bajić, Dražen; Ljumović, PetarINFLUENCE OF THE PROCESSING ROUTE ON THE MICROSTRUCTURE FORMATION AT SEMI-SOLID TEMPERATURES FOR ALUMINUM ALLOY A380 // CONFERENCE PROCEEDINGS of the 20th International Conference on Materials / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 137-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
15.Veić, Mario; Jozić, Sonja; Bajić, DraženSurface roughness modelling in super duplex stainless steel turning // International journal for engineering modelling, 31 (2018), 3; 19-34 (međunarodna recenzija, članak, znanstveni)
-
16.Dumanić, Ivana; Jozić, Sonja; Bajić, Dražen; Sučić, MihovilExperimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis // Mechanical Technologies and Structural Materials MTSM2018
Split, Hrvatska, 2018. str. 13-21 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Jozić, Sonja; Bajić, Dražen; Dumanić, Ivana; Kodžoman, MarkoOptimization of High Pressure Die Casting Process using Taguchi method and Computer Aided Casting Simulation Technique // Mechanical Technologies and Structural Materials MTSM2018 / Jozić, Sonja ; Nikola, Gjeldum (ur.).
Split: Croatian Society for Mechanical Technologies, 2018. str. 77-82 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Dragičević, Mario; Jozić, Sonja; Bajić, DraženFinite Element Simulation of Stresses Distribution and Tool Displacement in the Cutting Tool during hard end-milling in different machining conditions // Mechanical Technologies and Structural Materials MTSM2017 / Sonja Jozić, Branimir Lela (ur.).
Split: Croatian society for mechanical technologies, 2017. str. 29-36 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Veić, Mario; Jozić, Sonja; Bajić DraženDevelopment and optimization of surface roughness predictive models in turning super duplex stainless steel by using artificial intelligence methods // MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2017. str. 149-158 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Jozić, Sonja; Bajić, Dražen; Veić, MarioEXPERIMENTAL INVESTIGATION OF SUPER-DUPLEX STAINLESS STEEL TURNING // COMPUTER INTEGRATED MANUFACTURING AND HIGH SPEED MACHINING / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2017. str. 127-131 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Celent, Luka; Bajić, Dražen; Jozić, SonjaReverse engineering process application in single item production // Mechanical Technologies and Structural Materials / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2016. str. 17-21 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Peko, Ivan; Bajić, Dražen; Veža, IvicaSelection of additive manufacturing process using the AHP method // Conference Proceedings "International conference “Mechanical Technologies and Structural Materials” 2015. / Jozić, Sonja ; Lela, Branimir (ur.).
Split: CROATIAN SOCIETY FOR MECHANICAL TECHNOLOGIES, 2015. str. 119-129 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Dragičević, Mario; Jozić, Sonja; Bajić, DraženOptimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis // MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2015. str. 41-46 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Dragičević, Mario; Jozić, Sonja; Bajić, DraženOptimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis // 5th International Conference of Mechanical Technologies and Structural Materials
Split, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
25.Celent, Luka; Bajić, Dražen; Jozić, Sonja; Lela, BranimirPerformance of environmentally friendly machining using compressed cold air cooling: focusing on process level activities and improvements // Trends in the Development of Machinery and Associated Technology - TMT 2015 / Sabahudin, Ekinović (ur.).
Zenica: Mašinski fakultet Univerziteta u Zenici, 2015. str. 9-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
