Pregled po CROSBI profilu: Josip Brnić (CROSBI Profil: 12902, MBZ: 148822)
Pronađeno 342 radova
-
1.Qiu, Dechao; Cheng, Dongfeng; Dong, Wenwei; Niu, Jitai; Brnić, JosipBrazing 55 vol.% SiCp/ZL102 composites with Al- 17.0Cu-8.0 Mg-1.5Ni filler metal // Welding in the world, x (2023), y, 11 doi:10.1007/s40194-023-01548-w (međunarodna recenzija, članak, znanstveni)
-
2.Qiu, Dechao; Gao, Zeng; Niu, Jitai; B, Xianli; Brnić, JosipA Novel Brazing Technology for SiCp/ZL102 Composites Used for Lightweight Transmit/Receive Module in New Generation Phased Array Radar // Journal of Engineering Materials and Performance, 32 (2023), 1-11 doi:.org/10.1007/s11665-023-08188-7 (međunarodna recenzija, članak, znanstveni)
-
3.Brnić, Josip; Baloš, Sebastian; Brčić, Marino; Dramičanin, Miroslav; Kršćanski, Sanjin; Milutinović, Mladomir; Ding, Biao; Gao, ZengTesting and Analysis of Uniaxial Mechanical Fatigue, Charpy Impact Fracture Energy and Microhardness of Two Low-Carbon Steels // Materials, 16 (2023), 2; 884, 20 doi:10.3390/ma16020884 (međunarodna recenzija, članak, znanstveni)
-
4.Zhang, Shunran; Ren, Weili; Ding, Biao; Zhong, Yunbo; Yuan, Xiaotan; Zheng, Tianxiang; ... Brnić, Josip; Gao, Yanfei; Liaw, Peter K.Saturation effect of creep-fatigue cyclic-life for Nickel-based superalloy DZ445 under long-term tensile dwell periods at 900 °C // Journal of Materials Research and Technology, 19 (2022), 3216-3230 doi:10.1016/j.jmrt.2022.06.073 (međunarodna recenzija, članak, znanstveni)
-
5.Ding, Biao; Ren, Weili; Zhong, Yunbo; Yuan, Xiaton; Shen, Zhe; Guo, Yifeng; .....Brnić, Josip; Gao, Yanfei; Liaw, K Peter.Revealing the influential mechanism of strain ranges on cyclic-life saturation during creep- fatigue in Nickel-based superalloy DZ445 // International journal of plasticity, 155 (2022), 103320, 24 doi:10.1016/j.ijplas.2022.103320 (međunarodna recenzija, članak, znanstveni)
-
6.Ding, Biao; Ren, Weili; Zhong, Yunbo; Yuan. Xiaotan; Zheng, Tianxiang; Shen, Zhe; ...Peng, Jianchao; Brnić, Josip; Gao, Yanfei; Liaw, Peter KComparison of the creep-fatigue cyclic life saturation effect for three different superalloys // Materials Science and Engineering: A Structural Materials: Properties, Microstructure and Processing, 842 (2022), 143086, 16 doi:10.1016/j.msea.2022.143086 (međunarodna recenzija, članak, znanstveni)
-
7.Ding, Biao; Ren, Weili; Zhong, Yunbo; Yuan, Xiaotan; Peng, Jianchao; Zheng, Tianxiang; Shen, Zhe; ...Brnić, Josip; Liaw, Peter K.Accuracy of the predicting for creep-fatigue cyclic life based on parameters in a characteristic cycle // Engineering fracture mechanics, 255 (2021), 107955, 22 doi:10.1016/j.engfracmech.2021.107955 (međunarodna recenzija, članak, znanstveni)
-
8.Gao, Zeng; Yin, Congxin; Cheng, Donfeng; Feng, Jianguang; He, Peng; Niu, Jitai; Brnić, JosipSintering Bonding of SiC Particulate Reinforced Aluminum Metal Matrix Composites by Using Cu Nanoparticles and Liquid Ga in Air // Nanomaterials, 11 (2021), 7; 1800, 14 doi:10.3390/nano11071800 (međunarodna recenzija, članak, znanstveni)
-
9.Brnić, Josip; Brčić, Marino; Baloš, Sebastian; Vukelić, Goran; Kršćanski, Sanjin; Milutinović, Mladen; Dramićanin, MiroslavS235JRC+C Steel Response Analysis Subjected to Uniaxial Stress Tests in the Area of High Temperatures and Material Fatigue // Sustainability, 13 (2021), 10; 5675, 16 doi:10.3390/su13105675 (međunarodna recenzija, članak, znanstveni)
-
10.Ding, Biao; Ren, Weili; Zhong, Yunbo; Yuan, Xiaotan; Peng, Yianchao; Zheng, Tianxiang; Shen, Zhe; ... Brnić, Josip; Liaw, Peter, K.Analysis of the fully-reversed creep-fatigue behavior with tensile-dwell periods of superalloy DZ445 at 900 °C // Engineering fracture mechanics, 250 (2021), 107781, 18 doi:10.1016/j.engfracmech.2021.107781 (međunarodna recenzija, članak, znanstveni)
-
11.Vukelić, Goran; Vizentin, Goran; Brnić, Josip; Brčić, Marino, Sedmak, FlorianLong-Term Marine Environment Exposure Effect on Butt-Welded Shipbuilding Steel // Journal of marine science and engineering, 9 (2021), 5; 491, 12 doi:.org/10.3390/jmse9050491 (međunarodna recenzija, članak, znanstveni)
-
12.Brčić, Marino; Kršćanski, Sanjin; Brnić, JosipRotating Bending Fatigue Analysis of Printed Specimens from Assorted Polymer Materials // Polymers, 13 (2021), 7; 1020, 11 doi:10.3390/polym13071020 (međunarodna recenzija, članak, znanstveni)
-
13.Kršćanski, Sanjin; Brnić, JosipVirtual Crack Closure as a Method for Calculating Stress Intensity Factor of Cracks in Metallic Specimens // Materials Design and Applications III / da Silva, Lucas F. M. (ur.).
Cham: Springer, 2021. str. 29-45 doi:10.1007/978-3-030-68277-4_3 -
14.Gao, Zeng; Ji, Fei; Cheng, Dongfeng; Yin, Congxin; Niu, Jitai; Brnić, JosipHydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals // Energies, 14 (2021), 5; 1433, 12 doi:10.3390/en14051433 (međunarodna recenzija, članak, znanstveni)
-
15.Brnić, Josip; Kršćanski, Sanjin; Brčić, MarinoComparison of responses of different types of steel alloys under the same loading and environmental conditions // Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 235 (2021), 6; 1194-1202 doi:10.1177/1464420720984507 (međunarodna recenzija, članak, znanstveni)
-
16.Kršćanski, Sanjin; Brnić, JosipVirtual crack closure as a method for calculating stress intensity factor of cracks in metallic specimens // Book of abstracts of the 3rd International Conference on Materials Design and Applications 2020 MDA 2020 / da Silva, Lucas F. M. (ur.).
Porto, 2020. str. 64-64 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
17.Brnić, Josip; Brčić, Marino; Kršćanski, Sanjin; Niu, Jitai; Chen, Sijie; Gao, ZengDeformation Behavior of C15E + C Steel under Different Uniaxial Stress Tests // Metals, 10 (2020), 11; 1445, 19 doi:10.3390/met10111445 (međunarodna recenzija, članak, znanstveni)
-
18.Kršćanski, Sanjin; Brnić, JosipPrediction of Fatigue Crack Growth in Metallic Specimens under Constant Amplitude Loading Using Virtual Crack Closure and Forman Model // Metals, 10 (2020), 7; 977, 14 doi:10.3390/met10070977 (međunarodna recenzija, članak, znanstveni)
-
19.Gao, Zeng; Ba, Xianli; Yang, Huanyu; Yin, Congxin; Liu, Shanguang; Niu, Jitai; Brnić, JosipJoining of Silicon Particle-Reinforced Aluminum Matrix Composites to Kovar Alloys Using Active Melt-Spun Ribbons in Vacuum Conditions // Materials, 13 (2020), 13; 2965, 16 doi:10.3390/ma13132965 (međunarodna recenzija, članak, znanstveni)
-
20.Brnić, Josip; Kršćanski, Sanjin; Brčić, MarinoMechanical Behavior Analysis of Stainless Steels Subjected to Uniaxial Stress Tests // IOP conference series. Materials science and engineering, 840 (2020), 1; 012012, 6 doi:10.1088/1757-899X/840/1/012012 (međunarodna recenzija, članak, znanstveni)
-
21.Gao, Zeng; Yang, Huanyu; Feng, Jianguang; Ji, Fei; Niu, Jitai; Brnić, JosipFlux-Free Diffusion Joining of SiCp/6063 Al Matrix Composites Using Liquid Gallium with NanoCopper Particles in Atmosphere Environment // Nanomaterials, 10 (2020), 437-449 doi:10.3390/nano10030437 (međunarodna recenzija, članak, znanstveni)
-
22.Brčić, Marino; Brnić, Josip; Čanađija, MarkoEquivalent beam model of SWNT and DWNT with imperfections // Procedia Manufacturing, 37 (2019), 417-424 doi:10.1016/j.promfg.2019.12.068 (međunarodna recenzija, članak, znanstveni)
-
23.Brnić, Josip; Brčić, Marino; Kršćanski, Sanjin; Čanađija, Marko; Niu, JitaiAnalysis of Materials of Similar Mechanical Behavior and Similar Industrial Assignment // Procedia Manufacturing, 37 (2019), 207-213 doi:10.1016/j.promfg.2019.12.037 (međunarodna recenzija, članak, znanstveni)
-
24.Brnić, Josip; Kršćanski, Sanjin; Brčić, Marino; Geng, Lin; Niu, Jitai; Ding, BiaoReliable experimental data as a key factor for design of mechanical structures // Structural Engineering and Mechanics, An International Journal, 72 (2019), 2; 245-256 doi:10.12989/sem.2019.72.2.245 (međunarodna recenzija, članak, znanstveni)
-
25.Brnić, Josip; Brčić, Marino; Kršćanski, SanjinConsiderations relating to the behavior of steel alloys of similar industrial applications // The 9th International Conference on Physical and Numerical Simulation of Materials Processing (9th ICPNS)
Sankt Peterburg, Ruska Federacija; Moskva, Ruska Federacija, 2019. (plenarno, međunarodna recenzija, pp prezentacija, znanstveni) -
26.Brčić, Marino; Čanađija, Marko; Brnić, JosipEquivalent beam model of single walled carbon nanotube with imperfections // IOP conference series. Materials science and engineering, 625 (2019), 012004, 5 doi:10.1088/1757-899X/625/1/012004 (međunarodna recenzija, članak, znanstveni)
-
27.Brnić, Josip; Kršćanski, Sanjin; Brčić, MarinoAnalysis of the mechanical response of materials used in design for highly stressed components // IOP conference series. Materials science and engineering, 625 (2019), 012003, 5 doi:10.1088/1757-899X/625/1/012003 (međunarodna recenzija, članak, znanstveni)
-
28.Čanađija, Marko; Munjas, Neven; Brnić, JosipThermodynamically consistent homogenization in finite strain thermoplasticity // International journal for multiscale computational engineering, 17 (2019), 2; 99-120 doi:10.1615/intjmultcompeng.2019026320 (međunarodna recenzija, članak, znanstveni)
-
29.Brnić, Josip; Brčić, Marino; Kršćanski, Sanjin; Lanc, Domagoj; Chen, SijieUniaxial fatigue, creep and stress-strain responses of steel 30CrNiMo8 // Steel and composite structures, 31 (2019), 4; 409-416 doi:10.12989/scs.2019.31.4.409 (međunarodna recenzija, članak, znanstveni)
-
30.Brnić, JosipBehavior of Materials Used in Design of Highly Stressed Engineering Components at Different Temperatures // 3rd International Conference on Materials Engineering and Nano Sciences
Hiroshima, Japan, 2019. (plenarno, recenziran, pp prezentacija, znanstveni) -
31.Brnić, Josip; Vukelić, GoranExperimental determination of material mechanical properties and modeling of material behaviour in special environmental conditions // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4361-4367 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
32.Vukelić, Goran; Brnić, JosipUsing experimental and numerical characterization in comparing marine exhaust system stainless steels // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4423-4431 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Slišković, LorenaAnaliza naprezanja i deformacija statički neodređenih ravninskih okvira, 2018., diplomski rad, preddiplomski, Tehnički fakultet u Rijeci, Rijeka
-
34.Brnić, Josip; Kršćanski, Sanjin; Brčić, MarinoComparison of the mechanical behavior of materials subjected to specific operating conditions // IOP conference series. Materials science and engineering, 378 (2018), 1; 35-40 doi:10.1088/1757-899X/378/1/012007 (međunarodna recenzija, članak, znanstveni)
-
35.Brčić, Marino; Čanađija, Marko; Brnić, JosipImperfections in carbon nanotubes structure and their impact on the basic mechanical properties // IOP conference series. Materials science and engineering, 378 (2018), 30-34 doi:10.1088/1757-899x/378/1/012006 (međunarodna recenzija, članak, ostalo)
-
36.Brnić, Josip; Brčić, Marino; Kršćanski, Sanjin; Lanc, Domagoj; Niu, Jitai; Wang, PengSteel 51CrV4 under high temperatures, short- time creep and high cycle fatigue // Journal of constructional steel research, 147 (2018), 468-476 doi:10.1016/j.jcsr.2018.05.008 (međunarodna recenzija, članak, znanstveni)
-
37.Brnić, JosipAnalysis of Engineering Structures and Material Behavior. Chichester: John Wiley & Sons, 2018 (monografija)
-
38.Turkalj, Goran; Lanc, Domagoj; Banić, Damjan; Brnić, Josip; Vo, Thuc P.A shear-deformable beam model for stability analysis of orthotropic composite semi-rigid frames // Composite structures, 189 (2018), 648-660 doi:10.1016/j.compstruct.2018.01.105 (međunarodna recenzija, članak, znanstveni)
-
39.Munjas, Neven; Čanađija, Marko; Brnić, JosipThermo-Mechanical Multiscale Modeling in Plasticity of Metals Using Small Strain Theory // Journal of mechanics, 34 (2018), 5; 579-589 doi:10.1017/jmech.2017.37 (međunarodna recenzija, članak, znanstveni)
-
40.Brčić, Marino; Čanađija, Marko; Brnić, JosipInfluence of imperfections on double walled carbon nanotube mechanical properties // ANM2017, 9th International Conference on Advanced Nano Materials
Aveiro, Portugal, 2017. str. 17397-17403 doi:10.1016/j.matpr.2018.06.041 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
41.Banduka, AljošaAnaliza naprezanja elemenata strukture rešetke dalekovoda za prijenos električne energije, 2017., diplomski rad, preddiplomski, Tehnički fakultet u Rijeci, Rijeka
-
42.Barać, VilimDizajn i analiza naprezanja i deformiranja nosive konstrukcije, 2017., diplomski rad, preddiplomski, Tehnički fakultet u Rijeci, Rijeka
-
43.Čanađija, Marko; Munjas, Neven; Brnić, JosipOn homogenization in finite strain thermoplasticity // Book of Abstracts. COMPUTATIONAL PLASTICITY XIV - Fundamentals and Applications / Onate, E. ; Owen, D.R.J. ; Peić, D., Chiumenti, M. (ur.).
Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2017. 174, 1 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
44.Vučenović, MatejNumerička analiza naprezanja i optimizacija dizajna konstrukcije vozila, 2017., diplomski rad, diplomski, Tehnički fakultet, Rijeka
-
45.Torić, Neno; Brnić, Josip; Boko, Ivica; Čanađija, Marko; Turkalj, Goran; Lanc, Domagoj; Brčić, Marino; Burgess, Ian; Harapin, Alen; Divić, Vladimir; Uzelac, IvanaCreep properties of grade S275JR steel at high temperature // 8th European Conference on Steel and Composite Structures / Jönsson, Jeppe (ur.).
Kopenhagen, 2017. str. 2806-2810 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
46.Torić, Neno; Boko, Ivica; Uzelac, Ivana; Harapin, Alen; Divić, Vladimir; Galić, Mirela; Brnić, Josip; Čanađija, Marko; Turkalj, Goran; Lanc, Domagoj et al.High-temperature properties of aluminum alloy EN6082AW T6 // Applications of Fire Engineering / Gillie, Martin ; Wang, Yong (ur.).
Manchester: CRC Press ; A.A. Balkema Publishers, 2017. str. 31-35 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
47.Turkalj, Goran; Lanc, Domagoj; Banić, Damjan; Brnić, JosipA shear-flexible beam model for large displacement analysis of composite beam-type structures // MECHCOMP3: 3rd International Conference on Mechanics of Composites / Ferreira, Antonio J. M. ; Viola ; Erasmo ; Tornabene, Francesco ; Fantuzzi, Nicholas (ur.).
Bolonja: Societa Editrice Esculapid, 2017. str. 18-19 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
48.Vukelić, Goran; Brnić, JosipExperimental and Computational Analysis of Pressure Reducer Failure // CFRAC 2017, International Conference on Computational Fracture and Failure of Materials and Structures, Book of Abstracts / Moes, Nicolas ; Oliver, Xavier ; Jirasek, Milan ; Allix, Olivier (ur.).
Nantes: Ecole Centrale de Nantes, 2017. str. 145- (predavanje, međunarodna recenzija, sažetak, znanstveni) -
49.Vukelić, Goran; Brnić, JosipNumerical prediction of fracture behavior for austenitic and martensitic stainless steels // International Journal of Applied Mechanics, 9 (2017), 4; 1750052-1 doi:10.1142/S1758825117500521 (međunarodna recenzija, članak, znanstveni)
-
50.Torić, Neno; Brnić, Josip; Boko, Ivica; Brčić, Marino; Burgess, Ian W.; Uzelac Glavinić, IvanaDevelopment of a high temperature material model for grade s275jr steel // Journal of constructional steel research, 137 (2017), 161-168 doi:10.1016/j.jcsr.2017.06.020 (međunarodna recenzija, članak, znanstveni)
