Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 995719

An Open-Source Hardware/Software IED based on IoT and IEC 61850 Standard


Mlakić, Dragan; Nikolovski, Srete; Hamid Reza, Baghaee
An Open-Source Hardware/Software IED based on IoT and IEC 61850 Standard // Proceedings from The 2nd International Colloquium on Smart Grid Metrology / Roman Malarić, Goran Petrović (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu ; Fakultet elektrotehnike i računarstva Sveučilišta u Zagrebu, 2019. str. 41-46 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 995719 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
An Open-Source Hardware/Software IED based on IoT and IEC 61850 Standard

Autori
Mlakić, Dragan ; Nikolovski, Srete ; Hamid Reza, Baghaee

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings from The 2nd International Colloquium on Smart Grid Metrology / Roman Malarić, Goran Petrović - Split : Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu ; Fakultet elektrotehnike i računarstva Sveučilišta u Zagrebu, 2019, 41-46

ISBN
978-953-184-254-7

Skup
2nd International Colloquium on Smart Grid Metrology (SMAGRIMET 2019)

Mjesto i datum
Split, Hrvatska, 09.04.2019. - 12.04.2019

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Arduino, Java, automatic metering reading, electric energy measurement, IEC 61850, Linux application, open source hardware.

Sažetak
In this paper, a measurement device based on "Open Source" components of hardware and software will be presented. This device has been used to measure voltages and currents of a low-voltage (LV) networks, on which a virtually unlimited number of sensors can be added, and the device is assembled of components available on electronic components Internet. The used hardware for this project is based on Arduino UNO R3 motherboard and peripheral sensors needed for measurement of the mentioned data. The Arduino motherboard is not only the sole peace of hardware, but it can also act as a Wi- Fi router for the devices and the laptop used for data presentation and server side computations. The server is programmed in Java programming language and is open source. Main goal was to make smart meter by the “Do It Yourself” method spending as much less founds as it is possible, by keeping user friendly interface, data validity, accuracy of measurement and ease of use for final user. Data gathering is achieved in almost 1 ms which is excellent for custom made device. However, the measured values should be calculated to RMS values to be usable for energy analyzes and further processing of information.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika



POVEZANOST RADA


Ustanove:
Fakultet elektrotehnike, računarstva i informacijskih tehnologija Osijek

Profili:

Avatar Url Srete Nikolovski (autor)

Citiraj ovu publikaciju:

Mlakić, Dragan; Nikolovski, Srete; Hamid Reza, Baghaee
An Open-Source Hardware/Software IED based on IoT and IEC 61850 Standard // Proceedings from The 2nd International Colloquium on Smart Grid Metrology / Roman Malarić, Goran Petrović (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu ; Fakultet elektrotehnike i računarstva Sveučilišta u Zagrebu, 2019. str. 41-46 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Mlakić, D., Nikolovski, S. & Hamid Reza, B. (2019) An Open-Source Hardware/Software IED based on IoT and IEC 61850 Standard. U: Roman Malarić, G. (ur.)Proceedings from The 2nd International Colloquium on Smart Grid Metrology.
@article{article, author = {Mlaki\'{c}, Dragan and Nikolovski, Srete and Hamid Reza, Baghaee}, editor = {Roman Malari\'{c}, G.}, year = {2019}, pages = {41-46}, keywords = {Arduino, Java, automatic metering reading, electric energy measurement, IEC 61850, Linux application, open source hardware.}, isbn = {978-953-184-254-7}, title = {An Open-Source Hardware/Software IED based on IoT and IEC 61850 Standard}, keyword = {Arduino, Java, automatic metering reading, electric energy measurement, IEC 61850, Linux application, open source hardware.}, publisher = {Fakultet elektrotehnike, strojarstva i brodogradnje Sveu\v{c}ili\v{s}ta u Splitu ; Fakultet elektrotehnike i ra\v{c}unarstva Sveu\v{c}ili\v{s}ta u Zagrebu}, publisherplace = {Split, Hrvatska} }
@article{article, author = {Mlaki\'{c}, Dragan and Nikolovski, Srete and Hamid Reza, Baghaee}, editor = {Roman Malari\'{c}, G.}, year = {2019}, pages = {41-46}, keywords = {Arduino, Java, automatic metering reading, electric energy measurement, IEC 61850, Linux application, open source hardware.}, isbn = {978-953-184-254-7}, title = {An Open-Source Hardware/Software IED based on IoT and IEC 61850 Standard}, keyword = {Arduino, Java, automatic metering reading, electric energy measurement, IEC 61850, Linux application, open source hardware.}, publisher = {Fakultet elektrotehnike, strojarstva i brodogradnje Sveu\v{c}ili\v{s}ta u Splitu ; Fakultet elektrotehnike i ra\v{c}unarstva Sveu\v{c}ili\v{s}ta u Zagrebu}, publisherplace = {Split, Hrvatska} }




Contrast
Increase Font
Decrease Font
Dyslexic Font