Pregled bibliografske jedinice broj: 993491
ANALYSIS OF WELD JOINTS MADE OF TITANIUM ALLOY GRADE 2 PRODUCED BY ELECTRON BEAM WELDING
ANALYSIS OF WELD JOINTS MADE OF TITANIUM ALLOY GRADE 2 PRODUCED BY ELECTRON BEAM WELDING // Metalurgija, 3-4 (2019), 58; 255-258 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 993491 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
ANALYSIS OF WELD JOINTS MADE OF TITANIUM ALLOY GRADE 2 PRODUCED BY ELECTRON BEAM WELDING
Autori
Barta, Jozef ; Maronek, Milan ; Šimekova, B ; Marić, Dejan
Izvornik
Metalurgija (0543-5846) 3-4
(2019), 58;
255-258
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
titanium Grade2 ; electron beam welding ; mechanical properties ; structural analysis
Sažetak
Selected properties of welded joints of 2 mm thick titanium alloy Grade 2 produced by different welding parameters of electron beam welding were investigated. The visual inspection, macro and micro analysis, tensile strength test and microhardness measurements were performed. Samples manufactured by appropriate welding parameters had no internal defects, heat-affected zone (HAZ) was narrow and transformation from α phase to β phase was observed in this area. The failure occurred in the base metal during tensile test, while maximum ultimate tensile strength reached 454, 3 MPa.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)
- Scopus
