Naslov
Tensile properties of multi-material 3D-printed parts

Autori
Godec, Damir ; Gabrić, Ivan ; Pilipović, Ana ; Smoljkić, Marija ; Surma, Robert

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
10th International scientific conference MOTSP2018 Management of Technology Step to Sustainable Production / Ćosić, Predrag ; Barić, Gordana ; Trstenjak, Maja - Zagreb : Croatian Association for PLM (CAPLM), 2018, 43-43

Skup
10th International Scientific Conference - Management of Technology – Step to Sustainable Production (MOTSP 2018)

Mjesto i datum
Primošten, Hrvatska, 06.06.2018. - 08.06.2018

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
3D printing ; PolyJet Matrix ; multi-material parts ; tensile properties

Sažetak
Recent developments in 3D printing (additive) technologies allow production of multi-material parts. PolyJet Matrix technology is one of technologies for 3D printing parts with up to 14 different polymer digital materials in single process, by mixing only two basic materials. Although for basic materials a data about mechanical properties can be found, in case of digital materials (mixtures of two basic materials) there is a lack of some of those data regarding first of all orientation of the parts during 3D printing. The paper presents analysis of tensile properties of basic and digital materials, comparison of obtained data with data given from material producer, as well as the influence of part orientation on 3D printed parts properties.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA