Naslov
Modelling and simulation of deformation of cutting tool during cutting

Autori
Mikulić, Ivan ; Stoić, Katarina ; Stoić, Marija ; Stoić, Antun

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo

Izvornik
Proceedings of TEAM 2018 9th international Scientific and expert conference / Lalić, Bojan - Novi Sad : Faculty of technical sciences Novi Sad, 2018, 134-139

ISBN
978-86-6022-098-3

Skup
9th International Scientific and Expert Conference (TEAM 2018)

Mjesto i datum
Novi Sad, Srbija, 10.10.2018. - 12.10.2018

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
FEM, cutting tool, deformation, optimisation

Sažetak
This work simulates the stress and deformation of the tool holder for turning and determines the elastic deformation value of the tip of the cutting insert. Cross-section of tool holder was 32x25 mm and holder with cutting insert were modeled in SolidWorks. The ANSYS structural analysis software was used to simulate the load using the finite element method. Two size elements of the network are selected. One network has elements with size of 5 mm, and the other is a mesh with size of 1 mm. The simulation was carried out for five different values of force acting on the model. Each of these 5 values of forces was carried out through simulation on the above-mentioned two different finite element network arrangement

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA