Pregled bibliografske jedinice broj: 982732
Fault detection based on instantaneous angular speed measurement and variational mode decomposition
Fault detection based on instantaneous angular speed measurement and variational mode decomposition // MATEC Web of Conferences 211, 18006 (2018), VETOMAC XIV / Maia, Nuno ; Dimitrovová, Zuzana (ur.).
Lisabon: EDP Sciences, 2018. str. 1-6 doi:10.1051/matecconf/201821118006 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 982732 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Fault detection based on instantaneous angular speed measurement and variational mode decomposition
Autori
Braut, Sanjin ; Žigulić, Roberto ; Skoblar, Ante ; Štimac Rončević, Goranka
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
MATEC Web of Conferences 211, 18006 (2018), VETOMAC XIV
/ Maia, Nuno ; Dimitrovová, Zuzana - Lisabon : EDP Sciences, 2018, 1-6
Skup
The 14th International Conference on Vibration Engineering and Technology of Machinery (VETOMAC XIV)
Mjesto i datum
Lisabon, Portugal, 10.09.2018. - 13.09.2018
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Fault detection, rotor-stator partial rub, instantaneous angular speed, variational mode decomposition
Sažetak
Rotating machinery encounter throughout their lifetime various problems. Among them, a rotor- stator rubbing problem is one of the most common. This paper proposes a procedure, which applies the instantaneous angular speed (IAS) measurement as a starting step for rotor-stator partial rub detection. There are various approaches regarding counting techniques and processing of signal. In this paper, an application of analog signals from toothed wheel encoder or zebra tape encoder is considered at low to moderate sampling rates. As the rubbing process is nonlinear, this paper is proposing a variational mode decomposition (VMD) as the second step of the detection procedure. The VMD is relatively new method with promising results especially interesting for machinery fault detection. Detection tool is tested on laboratory test rig at two different rotor operating conditions i.e. without rotor-stator rubbing and with light partial rotor-stator rub. Measurements were performed with non-contact eddy current displacement sensors pointed to toothed wheel encoder. Results are presented in the shape of rotor orbits, IAS signals, FFT spectra of IAS signals and VMD spectrograms. Developed fault detection procedure based on IAS measurement and VMD decomposition was successfully tested on laboratory test rig for no rubbing and light rotor to stator partial rub condition.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Ustanove:
Tehnički fakultet, Rijeka
Profili:
Roberto Žigulić
(autor)
Sanjin Braut
(autor)
Ante Skoblar
(autor)
Goranka Štimac Rončević
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus