Pregled bibliografske jedinice broj: 969509
Effect of nanoparticle-enhanced phase change material on efficiency of photovoltaic system: A numerical investigation
Effect of nanoparticle-enhanced phase change material on efficiency of photovoltaic system: A numerical investigation // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 969509 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Effect of nanoparticle-enhanced phase change material on efficiency of photovoltaic system: A numerical investigation
Autori
Arici, Muslum ; Biligin, Feyza ; Nižetić, Sandro ; Papadopoulos, Agis
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
/ - Split : Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018, 1-6
ISBN
978-953-290-081-1
Skup
3rd International Conference on Smart and Sustainable Technologies (SpliTech 2018)
Mjesto i datum
Split, Hrvatska, 26.06.2018. - 29.06.2018
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
solar energy ; photovoltaic (PV) ; phase change material (PCM) ; passive
Sažetak
The nanoparticle-enhanced phase change material (NEPCM) has a good potential for improving the energy conversion efficiency of photovoltaic (PV) system by increasing the thermal conductivity of phase change material. In this paper, a photovoltaic panel coupled with nanoparticle- enhanced phase change material (PV-NEPCM) was numerically investigated considering different PCM melting temperatures (ranging from 5 to 50°C with 1°C intervals), PCM layer thicknesses the range of 1-50 mm with 1 mm intervals) and nanoparticle volume fractions (1%, 3% and 5%). Measured monthly-averaged climatic data for Ankara was used to analyze the effect of investigated parameters on the conversion efficiency, cell temperature and electricity output of PV-NEPCM system. The results showed that the combination which provides the highest improvement (1.72%) is NEPCM with PCM melting temperature of 20oC, PCM thickness of 50 mm and nanoparticle volume fraction of 5%. The total annual electricity output of PV panel, 9585 Wh/m2year, can be increased to 9750 Wh/m2year by incorporating NEPCM with optimized parameter.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split
Profili:
Sandro Nižetić
(autor)