Naslov
Effects of deposition height and width on film cooling

Autori
Wang, Jin ; Cui, Pei ; Sundén, Bengt ; Vujanović, Milan

Izvornik
Numerical Heat Transfer, Part A: Applications (1040-7782) 70 (2016), 6; 673-687

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, ostalo

Ključne riječi
barrier coating spallation ; heat-transfer ; cylindrical holes ; turbine blade ; optimization ; simulations ; performance ; parameters ; channels

Sažetak
Because natural gas resources continue to be depleted for usage of gas turbines, it becomes important to search for alternate fuels. Coal-derived synthetic fuels contain traces of ash and other contaminants that result in deposition on vane and turbine surfaces. The present research shows a comparison of simulated results with and without a deposition configuration. Film cooling effectiveness distribution after the deposition was obtained to investigate the effects of various deposition heights and widths under the blowing ratios of 0.5, 0.75, and 1.0. The results indicated that the deposition near the hole exit can weaken the cooling performance. Moreover, it is revealed that the film cooling effectiveness deteriorates with increased deposition heights. The deposition width study revealed that a narrow deposition shows a good attachment of the coolant jet to the wall surface. It is found that an improvement of the film cooling effectiveness can be obtained by decreasing the blowing ratio.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA