Pregled bibliografske jedinice broj: 96531
Influence of substrate hardness on abrasion and erosion of DLC coatings
Influence of substrate hardness on abrasion and erosion of DLC coatings // Proceedings of the 2nd COST 516 Tribology Symposium / Vercammen, K. ; Meneve, J. (ur.).
Antwerpen, Belgija: Flemish Institute for Technological Research, 1999. str. 85-89 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 96531 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of substrate hardness on abrasion and erosion of DLC coatings
Autori
Ivušić, Vinko ; Schauperl, Zdravko ; Grilec, Krešimir
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 2nd COST 516 Tribology Symposium
/ Vercammen, K. ; Meneve, J. - : Flemish Institute for Technological Research, 1999, 85-89
Skup
COST 516 Tribology Symposium (2 ; 1999)
Mjesto i datum
Antwerpen, Belgija, 20.05.1999. - 21.05.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
hardness; abrasion; erosion; DLC coatings
Sažetak
For tribological applications the substrate hardness is of prime importance. In this paper a correlation between substrate hardness and coating life under different abrasion and erosion conditions (loads) was exemined. DLC coating were used in the test.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
