Pregled bibliografske jedinice broj: 964269
The Influence of Water on the Properties of Polyester Laminates Made by Manual Air Extrusion
The Influence of Water on the Properties of Polyester Laminates Made by Manual Air Extrusion // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 5; 1395-1398 doi:10.17559/TV-20170628133614 (međunarodna recenzija, prethodno priopćenje, znanstveni)
CROSBI ID: 964269 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The Influence of Water on the Properties of Polyester Laminates Made by Manual Air Extrusion
Autori
Marušić, Vlatko ; Samardžić, Ivan ; Opačak, Ivan ; Šakić, Dejan
Izvornik
Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku (1330-3651) 25
(2018), 5;
1395-1398
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, prethodno priopćenje, znanstveni
Ključne riječi
glass fibres ; mechanical properties ; polyester composites ; porosity ; water
Sažetak
The mechanical properties of polyester composites reinforced by various combinations of glass fibre types were investigated. The samples were tested before and after the operation of the wet media in the salt chamber. Cross sections were recorded to determine the presence of cavities. It was concluded that the properties of composites depended not only on the number and type of reinforcement but also much more on the portion of cavities. It is concluded that the intermediate surface with a smaller portion of the cavities contributes to the compositions to be firmer and stiffer, but also fragile. As a result, the negative influence of water increases with the increase of porosity.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Strojarski fakultet, Slavonski Brod
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus