Pregled bibliografske jedinice broj: 961222
The production and stabilization of cold-pressed linseed oil
The production and stabilization of cold-pressed linseed oil // Book of Abstracts 9th International Congress of Food Technologists, Biotechnologists and Nutritionists
Zagreb, 2018. str. 85-85 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 961222 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The production and stabilization of cold-pressed linseed oil
Autori
Moslavac, Tihomir ; Jokić, Stela ; Šubarić, Drago ; Aladić, Krunoslav ; Cikoš, Ana-Marija ; Ibrišimović, Martina
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of Abstracts 9th International Congress of Food Technologists, Biotechnologists and Nutritionists
/ - Zagreb, 2018, 85-85
Skup
9th International Congress of Food Technologists, Biotechnologists and Nutritionist
Mjesto i datum
Zagreb, Hrvatska, 03.10.2018. - 06.10.2018
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
linseed oil ; cold pressed ; process parameters ; oxidation stability ; antioxidants
Sažetak
Due to very specific fatty acid content, linseed oil is very susceptible and it can be a subject of oxidative degradation. Edible oil, produced by cold-pressing of linseeds, has reduced sustainability. Linseed oil is highly valued product because it contains essential fatty acids like linolenic and linoleic acid. The aim of this study was to examine the influence of process parameters of cold- pressing on the utilization of oil. During the process of pressing the impact of electromotor frequency, press head temperature at cake exit and size of the press head hatch was examined. Raw oil was produced by using continuous screw press and standard quality parameters of produced cold-pressed oil were determined. Oxidative stability of oil with addition of natural antioxidants was determined by the Test of sustainability at 98 oC. Natural antioxidants such as rosemary extract, sage extract, mix of sage and green tea extracts and mix of rosemary and green tea extracts were used. Results showed that process parameters of cold-pressing had influence on linseed oil yield. The highest yield of linseed oil was obtained by pressing at following process parameters: press head temperature at cake exit 100 oC, electromotor frequency 22 Hz and the press head hatch size of 8 mm. Applied antioxidants increased stability of oil and protected it from oxidative degradation.
Izvorni jezik
Engleski
Znanstvena područja
Prehrambena tehnologija
POVEZANOST RADA
Ustanove:
Prehrambeno-tehnološki fakultet, Osijek
Profili:
Krunoslav Aladić
(autor)
Ana-Marija Cikoš
(autor)
Stela Jokić
(autor)
Tihomir Moslavac
(autor)
Drago Šubarić
(autor)