Naslov
Production of personalized child orthosis using additive technology

Autori
Pakši, Ivana ; Galeta, Tomislav ; Bodlović, Ana-Marija, Raos, Pero

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo

Izvornik
ICIST 2018 Proceedings, Proceedings of the 8th International Conference on Information Society and Technology / Konjović, Z. ; Zdravković, M. ; Trajanović, M. - Niš, 2018, 343-345

Skup
8th International Conference on Information Society and Technology (ICICT 2018)

Mjesto i datum
Kopaonik, Srbija, 11.03.2018. - 14.03.2018

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
child orthosis ; additive technology ; 3D print ; 3D scan

Sažetak
This paper explains the production of a personalized child orthosis with 3D printing technology. In agreement with the doctor’s specialists, an appropriate candidate was selected. The components of a child's orthosis have been modelled and adapted based on the scans from candidate acquired with 3D scanning technology. The 3D scanning process with OrtoSCAN digitizer and component modelling in Autodesk Fusion 360 are explained. Customized child orthosis components were made using two 3D printers: Prusa i3 P3Steel and Geeetech Prusa i3 Pro. Patient visit was followed by assembling of the orthosis. After final design and orthosis trial, the conclusion is that less modification on the shoulder part is needed and there is still room for further optimization of the orthosis. By using a generative design, it is possible to obtain an even more lighter customized orthosis that will satisfy the required mechanical properties and fulfill its function.

Izvorni jezik
Engleski

POVEZANOST RADA