Naslov
PRIPREMA NANOKOMPOZITA POLI(ETILEN OKSIDA) I POLIEDARSKIH OLIGOMERNIH SILSESKVIOKSANA
(PREPARATION OF POLY(ETHYLENE OXIDE) NANOCOMPOSITES WITH POLYHEDRAL OLIGOMERIC SILSESQUIOXANES)

Autori
Stipanelov Vrandečić, Nataša ; Andričić, Branka ; Blanco, Ignazio

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
International conference 17th Ružička days, 2018 / - , 2018, 50-50

Skup
International conference 17th Ružička days

Mjesto i datum
Vukovar, Hrvatska, 19.09.2018. - 21.09.2018

Vrsta sudjelovanja
Poster

Vrsta recenzije
Nije recenziran

Ključne riječi
Poly(ethylene oxide), POSS, crystallinity

Sažetak
Poly(ethylene oxide) (PEO) is a semi- crystalline, biocompatible, water-soluble polyether commercially available in wide range of molecular weights (20 000 – 8 000 000). Depending on molecular weight, PEO finds considerable application in many different branches of industry. Since the discovery of the ionic conductivity of poly (ethylene oxide) complexes with alkali metal salts, polymer electrolytes have been extensively investigated as promising candidates to prepare thinner, lighter and safer lithium ion batteries. However, the typical linear PEO does not meet the production requirements because of its insufficient ionic conductivity due to the high crystallinity of the PEO chains. Solid polymer electrolyte (SPE) based on PEO usually shows low ionic conductivity at room temperature which is not suitable for practical applications. PEO shows significant conductivity above the melting point. There are a lot of different approaches to reduce the crystallinity and hence to improve the ionic conductivity of PEO-based electrolytes, including blending, modifying or making PEO derivatives. One possible way is introducing the nanofillers, such as polyhedral oligomeric silsesquioxanes (POSS) in polymer matrix. POSSs are nanoparticles composed of inorganic Si8O12 skeleton surrounded by eight organic groups. In this case the general formula is R7R'(SiO1.5)8 where R is isobutyl group and R' is phenyl group or monosupstituted phenyl group. Substituents on phenyl group are methyl, metoxy, fluorine and chlorine. In this work, the series of PEO nanocomposites with different hepta isobutyl polyhedral oligomeric silsesquioxanes (POSS) were prepared and the influence of POSSs on PEO melting was investigated. It was observed that the glass transition temperature, melting temperature and crystallinity of PEO decrease when POSSs with methyl, fluorine or chlorine substituent on phenyl groups are present.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo

POVEZANOST RADA