Pregled bibliografske jedinice broj: 956152
Computational Study on the Effects of Gravity Load on OoP Inter Storey Drift Approach of URM Infilled RC Frame
Computational Study on the Effects of Gravity Load on OoP Inter Storey Drift Approach of URM Infilled RC Frame // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Split: Hrvatsko društvo za mehaniku (HDM), 2018. str. 1-16 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 956152 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Computational Study on the Effects of Gravity Load on OoP Inter Storey Drift Approach of URM Infilled RC Frame
Autori
Anić, Filip ; Penava, Davorin ; Lozančić, Silva ; Sarhosis, Vasilis ; Abrahamczyk, Lars
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 9th International Congress of Croatian Society of Mechanics
/ Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela - Split : Hrvatsko društvo za mehaniku (HDM), 2018, 1-16
Skup
9th International Congress of Croatian Society of Mechanics (ICCSM 2018)
Mjesto i datum
Split, Hrvatska, 18.09.2018. - 22.09.2018
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Computational Study ; Effects of Gravity Load ; OoP Inter Storey Drift Approach ; URM Infilled RC Frame
Sažetak
This paper presents a study on effects of gravity load on OoP behaviour of RC frames with URM infill panels. The study was carried out on a 3D FE micromodel using inter – storey drift approach. Six distinct models were observed for each case, i.e. with and without the gravity load. Models differ in account of having / not having infill and various types of openings (different sizes and positions). From the results analysis, high agreeance with other experimental studies was found. Also, it was found that two approaches differ greatly. Without the gravity load, the infill developed negligible stresses and arching action was not detected. On the contrary, with the gravity load the infill obtained greater stresses, damage and two-hinged arching action was detected. In both cases, the initial stiffness was not affected by the infill or the opening. Infill and openings did modify the post peak behaviour in the case of models with gravity loads.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Ustanove:
Građevinski i arhitektonski fakultet Osijek