Naslov
The possibility of extending work time of tribocouple welding improved stainless steel with improved carbon steel

Autori
Marušić, Vlatko ; Dašić, Predrag ; Opačak, Ivan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Annual Session of Scientific Papers IMT ORADEA 2018 / Grebenisan, Gavril ; Pele, Alexandru-Viorel - Oradea : MATEC Web of Conferences, 2018, 1-4

Skup
IMT Oradea 2018

Mjesto i datum
Oradea, Rumunjska, 31.05.2018. - 01.06.2018

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
stainless steel ; wear resistance ; microstructure ; hardness

Sažetak
In the conditions of tribo-corrosion wear, extending of life time of parts can be achieved by using stainless steel, which is hardened to sufficiently high hardness. In the tribopair bolt/shell/slice of the bucket elevator transporter conveyor machine, the previously improved martensitic stainless steel for bolts is hardened at ≈ 45 HRC and welded with the improved high yield carbon steel for bolts. As the additional material, an electrode based on Cr-Ni-Mo (18/8/6) is used. The structure and hardness of welded samples are tested. On the tensile tester, resistance of the welded joint is tested with a simulated experiment. Dimensional control of wear of elements of tribopair was performed after six months in service. The analysis of test results showed that with regulated additional material and by applying the recommended welding parameters, the properties of the weld, which provide the necessary reliability of the joint in the conditions of tensile load, can be achieved, with a significant increase in the wear resistance of bolt.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA