Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 945964

Ispitivanje korozije traka CuAlNi legure dobivene brzim hlađenjem u NaCl otopini


Garvanović, Ines
Ispitivanje korozije traka CuAlNi legure dobivene brzim hlađenjem u NaCl otopini, 2018., diplomski rad, preddiplomski, Kemijsko-tehnološki fakultet, Split


CROSBI ID: 945964 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Ispitivanje korozije traka CuAlNi legure dobivene brzim hlađenjem u NaCl otopini
(Investigation of corrosion behavior of CuAlNi alloy ribons made by rapid solidification in NaCl solution)

Autori
Garvanović, Ines

Vrsta, podvrsta i kategorija rada
Ocjenski radovi, diplomski rad, preddiplomski

Fakultet
Kemijsko-tehnološki fakultet

Mjesto
Split

Datum
03.07

Godina
2018

Stranica
42

Mentor
Vrsalović, ladislav

Ključne riječi
legure s prisjetljivosti oblika, CuAlNi legura, korozija, elektrokemijske metode, SEM/EDS analiza
(shape memory alloy, CuAlNi alloy, corrosion, electrochemical metods, SEM/EDS analysis)

Sažetak
The corrosion behavior of the CuAlNi alloy ribbons obtained by rapid solidification was investigated in 0.9 % NaCl solution (pH 7.4) at temperatures of 24, 37 and 50 o C. The influence of chloride ions concentration on corrosion of CuAlNi ribbons has also been investigated in 0.1% and 1.5% NaCl solution. Measurements have been performed by electrochemical methods such as monitoring the open circuit potential, linear and potentiodynamic polarization methods. Results of the investigations have shown that increase in chloride concentration and electrolyte temperature leads to increase the corrosion current density and decrease the polarization resistance values which mean higher corrosion attack on CuAlNi alloy. Microscopic images have shown significant pitting corrosion damages on the CuAlNi alloy surface. Increasing the electrolyte temperature increases the surface damages of the electrode due to more intense corrosion. SEM surface images of CuAlNi electrodes have confirmed that with elevation of chloride concentration a more intense corrosion attack occurs. EDS surface analysis indicated dominant percentage of copper, chlorine and oxygen on the surface, indicating the formation of copper oxide and chloride as the major corrosion products on the surface. The presence of a small percentage of aluminum indicates its distribution in the form of aluminum oxide and chloride in the surface layer.

Izvorni jezik
Hrvatski

Znanstvena područja
Kemijsko inženjerstvo



POVEZANOST RADA


Projekti:
HRZZ-IP-2014-09-3405 - Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra (DMFP-CuSMA) (Gojić, Mirko, HRZZ - 2014-09) ( CroRIS)

Ustanove:
Kemijsko-tehnološki fakultet, Split

Profili:

Avatar Url Ladislav Vrsalović (mentor)


Citiraj ovu publikaciju:

Garvanović, Ines
Ispitivanje korozije traka CuAlNi legure dobivene brzim hlađenjem u NaCl otopini, 2018., diplomski rad, preddiplomski, Kemijsko-tehnološki fakultet, Split
Garvanović, I. (2018) 'Ispitivanje korozije traka CuAlNi legure dobivene brzim hlađenjem u NaCl otopini', diplomski rad, preddiplomski, Kemijsko-tehnološki fakultet, Split.
@phdthesis{phdthesis, author = {Garvanovi\'{c}, Ines}, year = {2018}, pages = {42}, keywords = {legure s prisjetljivosti oblika, CuAlNi legura, korozija, elektrokemijske metode, SEM/EDS analiza}, title = {Ispitivanje korozije traka CuAlNi legure dobivene brzim hla\djenjem u NaCl otopini}, keyword = {legure s prisjetljivosti oblika, CuAlNi legura, korozija, elektrokemijske metode, SEM/EDS analiza}, publisherplace = {Split} }
@phdthesis{phdthesis, author = {Garvanovi\'{c}, Ines}, year = {2018}, pages = {42}, keywords = {shape memory alloy, CuAlNi alloy, corrosion, electrochemical metods, SEM/EDS analysis}, title = {Investigation of corrosion behavior of CuAlNi alloy ribons made by rapid solidification in NaCl solution}, keyword = {shape memory alloy, CuAlNi alloy, corrosion, electrochemical metods, SEM/EDS analysis}, publisherplace = {Split} }




Contrast
Increase Font
Decrease Font
Dyslexic Font