Pregled bibliografske jedinice broj: 940895
Influence of the Change in Relative Dielectric Constant on Partial Discharge in Insulators
Influence of the Change in Relative Dielectric Constant on Partial Discharge in Insulators // Engineering Design Applications / Öchsner, Andreas ; Altenbach, Holm (ur.).
Cham: Springer, 2019. str. 27-42 doi:10.1007/978-3-319-79005-3_3
CROSBI ID: 940895 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of the Change in Relative Dielectric Constant on Partial Discharge in Insulators
Autori
Kuzmanić, Ivica ; Vujović, Igor
Vrsta, podvrsta i kategorija rada
Poglavlja u knjigama, znanstveni
Knjiga
Engineering Design Applications
Urednik/ci
Öchsner, Andreas ; Altenbach, Holm
Izdavač
Springer
Grad
Cham
Godina
2019
Raspon stranica
27-42
ISBN
978-3-319-79004-6
Ključne riječi
Relative dielectric constant ; Partial discharge ; Dielectrics ; Equivalent circuit ; Simulink
Sažetak
This paper covers several topics relating to a single problem. The primary concern is partial discharge (PD). The second concern is the influence of environmental factors on PD, which is calculated by modifying the relative dielectric constant. The third concern is the manner of presentation of the obtained data. Finally, the basic concern is predicting what will happen to the PD when a parameter changes a material’s characteristics, what the margin of tolerance is and consequently, what will happen to a dielectric-dependent system under PD. The study of partial discharge in dielectrics is important for the reliability of electrical systems of vital importance aboard vehicles. This paper examines the effect of relative permittivity change to PD in dielectric materials. The topic was previously researched, but only for cables. PD modeling is carried out in Simulink using an equivalent electrical circuit. Simulation is carried out using the Matlab programming language using an m-script and Simulink model with parameter changes executed by script loop. Another topic of this paper is how to present the voluminous data obtained (in this case 3.5 GB), dealing with large data handling and visualization. 3D graphs with multi-curve representation in the same figure are used for visualization of the obtained results.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika, Tehnologija prometa i transport
POVEZANOST RADA
Ustanove:
Pomorski fakultet, Split
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Book Citation Index - Science (BKCI-S)
- Scopus