Pregled bibliografske jedinice broj: 934311
Distribution of stress in deformation zone of niobium microalloyed steel
Distribution of stress in deformation zone of niobium microalloyed steel // Metals and materials international, 24 (2018), 4; 746-751 doi:10.1007/s12540-018-0099-2 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 934311 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Distribution of stress in deformation zone of niobium microalloyed steel
Autori
Jandrlić, Ivan ; Rešković, Stoja ; Brlić, Tin
Izvornik
Metals and materials international (1598-9623) 24
(2018), 4;
746-751
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
microalloyed steel ; plastic deformation ; thermography ; stress ; deformation zone
Sažetak
Microalloyed steels today represent a significant part of total world production and processing of steel. Although widely used, there are scarce data on the stress distribution in the deformation zone of these steels. The research was carried out on two steel grades, both low-carbon structural steels with the same basic chemical composition, with one of them, additionally microalloyed with niobium. Differences in the stress distribution in the deformation zone between two tested steels were continuously observed and measured using the methods of digital image correlation and thermography. It has been found out that niobium microalloyed steel has significantly more complex material flow and stress distribution in the deformation zone when compared to the plain low carbon steel.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
POVEZANOST RADA
Projekti:
HRZZ-IP-2016-06-1270 - Istraživanja početka plastičnog toka metala kod hladne deformacije (MFSRIP062016) (Rešković, Stoja, HRZZ - 2016-06) ( CroRIS)
Ustanove:
Metalurški fakultet, Sisak
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
