Pregled bibliografske jedinice broj: 931625
Characterisation of the Combustion Process In the Spark Ignition and HCCI Engine
Characterisation of the Combustion Process In the Spark Ignition and HCCI Engine // Thermal science, 22 (2018), 5; 1-13 doi:10.2298/TSCI171230263V (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 931625 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Characterisation of the Combustion Process In the Spark Ignition and HCCI Engine
Autori
Vučetić, Ante ; Božić, Mladen ; Kozarac, Darko ; Lulić, Zoran
Izvornik
Thermal science (0354-9836) 22
(2018), 5;
1-13
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
SI engine, HCCI engine, methane, experimental engine testing
Sažetak
Homogeneous Charge Compression Ignition (HCCI) engine is a potential solution for reducing air pollution and for satisfying legal limits regarding emissions from internal combustion engines. HCCI engines have advantages of lower emissions of nitrogen oxides and particulate matter, compared to standard combustion modes, but on the other hand, one of the major disadvantages is the fact that it is difficult to control the start of combustion since it is highly sensitivity to the intake air temperature. Additional advantage of HCCI engine is the ability to operate with wide range of fuels. In order to demonstrate this potential, in this study, HCCI mode of operation is compared to the spark ignition (SI) mode of operation. The study aims to compare and characterise two different combustion modes on the same engine with different compression ratios and different fuels at similar operating conditions. For that purpose, the engine tests are performed at the same indicated mean effective pressures (IMEP) for the SI and HCCI combustion mode at the same engine speed while the tests are performed at three different engine speeds and three different loads. The measurements were performed on the experimental setup that consists of single cylinder diesel engine modified to enable operation in SI and HCCI modes. The characterisation includes the comparison of in-cylinder pressures, temperatures and rate of heat releases obtained by SI and HCCI combustion mode and presents comparisons of engine efficiencies and of emissions of HC, CO and NOX
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
IP-2014-09-1089 - Eksperimentalno istraživanje, optimizacija i karakterizacija rada klipnog motora uz dual-fuel izgaranje (DUFCOROC) (Kozarac, Darko, HRZZ - 2014-09) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus