Naslov
Production of stable amorphous form by means of spray drying

Autori
Nežić, Igor ; Sander, Aleksandra ; Meštrović, Ernest ; Čavužić, Dražen

Izvornik
Particulate science and technology (0272-6351) 37 (2019), 5; 628-638

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
amorphous structure ; characterization ; crystal structure ; active pharmaceutical ingredient ; spray drying

Sažetak
Spray drying is a very useful method for manufacturing of amorphous solid materials. This is mainly due to the possibility of fast solvent evaporation that leads to a rapid transformation of solution to a solid state. Besides evaporation kinetics, there are various process parameters that influence physical and chemical characteristics of such obtained material. The possibility of obtaining a stable amorphous structure of the active pharmaceutical ingredient in a spray-dryer was examined. A solution of the hydrochloride crystalline structure of the active pharmaceutical ingredient in a mixture of water and acetonitrile was dried at different temperatures and flow rates of nitrogen used for atomization, as well as the flow rates of the solution. The influence of the process conditions on the properties of the product was analyzed. The final dried products were characterized and identified with a variety of analytical and physical methods. The results showed that a stable amorphous structure of the high purity active pharmaceutical ingredient is obtained, and that the optimal conditions of the process are defined. The amorphous structure is stable at temperatures below 200 °C when it is transformed into a new crystal structure. Conditions of high relative air humidity lead to partial transformation.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo

POVEZANOST RADA