Pregled bibliografske jedinice broj: 924267
Contribution to the Optimisation of Esterification of Beech Wood by Citric Acid
Contribution to the Optimisation of Esterification of Beech Wood by Citric Acid // 28th ICWST - International Conference on Wood Science and Technology - Implementation of Wood Science in Woodworking Sector / Župčić, I. ; Živković, V. ; Miklečić, J. (ur.).
Zagreb: Šumarski fakultet Sveučilišta u Zagrebu, 2017. str. 135-141 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 924267 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Contribution to the Optimisation of Esterification of Beech Wood by Citric Acid
Autori
Hasan, Marin ; Hasan, Adriana ; Orešković, Gordana ; Jambreković, Branimir ; Antolović, Suzana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
28th ICWST - International Conference on Wood Science and Technology - Implementation of Wood Science in Woodworking Sector
/ Župčić, I. ; Živković, V. ; Miklečić, J. - Zagreb : Šumarski fakultet Sveučilišta u Zagrebu, 2017, 135-141
ISBN
978-953-292-053-6
Skup
28th ICWST - International Conference on Wood Science and Technology
Mjesto i datum
Zagreb, Hrvatska, 07.12.2017. - 08.12.2017
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
: Anti Swelling Efficiency (ASE), Chemical modification, Leachability Coefficient of gained Mass (LCM), Mass Loss caused by Leaching (MLL), Weight Percentage Gain (WPG) ; Wood Modification
Sažetak
Different concentrations of chemicals in water solution, final temperatures and curing periods were used for common beech wood modificiation with Citric acid (CA). In distilled water (at 60 °C) extracted specimens were impregnated with citric acid (CA) water solutions of different concentrations with phosphate catalyst. After impregnation, specimens were air-dried and then cured at elevated temperatures using different regimes. The effects of different modification regimes were assessed through the values of weight percentage gain (WPG), anti swelling efficiency (ASE), mass loss caused by leaching (MLL) and leachability coefficient of gained mass (LCM). Optimal combination of modification parameters was chosen for each of mentioned properties and then only one optimal combination of modification parameters was selected.
Izvorni jezik
Engleski
Znanstvena područja
Drvna tehnologija
POVEZANOST RADA
Ustanove:
Fakultet šumarstva i drvne tehnologije
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Conference Proceedings Citation Index - Science (CPCI-S)
- Scopus
- MEDLINE