Pregled bibliografske jedinice broj: 917231
The effect of initial zinc concentration and coagulant dose on zinc removal from aqueous solutions
The effect of initial zinc concentration and coagulant dose on zinc removal from aqueous solutions // Book of Abstracts of the International conference MATRIB 2011, Materials, Tribology, Recycling / Schauperl, Z. ; Šolić, S. (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2011. str. 70-70 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 917231 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The effect of initial zinc concentration and coagulant dose on zinc removal from aqueous solutions
Autori
Vukojević Medvidović, Nediljka ; Ugrina, Marin ; Nuić, Ivona ; Bosnić Ante
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of Abstracts of the International conference MATRIB 2011, Materials, Tribology, Recycling
/ Schauperl, Z. ; Šolić, S. - Zagreb : Hrvatsko društvo za materijale i tribologiju (HDMT), 2011, 70-70
ISBN
978-953-7040-19-2
Skup
International conference MATRIB 2011, Materials, Tribology, Recycling
Mjesto i datum
Vela Luka, Hrvatska, 29.06.-01.07
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
precipitation ; coagulation/flocculation ; zinc removal ; coagulant dose
Sažetak
This paper presents the prediction of breakthrough curves for the fixed bed column based on batch studies. Batch studies of lead removal on natural zeolite clinoptilolite have been performed. The obtained experimental data have been tested according to the Langmuir and Freundlich isotherms, and their parameters have been calculated. These parameters and the Mass Transfer Model have been used to predict theoretical breakthrough curves. Theoretical breakthrough curves have been compared with the experimental ones and a good agreement has been observed. This indicates that the Mass Transfer Model is applicable for prediction of breakthrough curves from batch studies. The overall mass transfer coefficient has been calculated from column experiments. This value allows for calculation of the height of the mass transfer zone as a very important parameter necessary for the column design
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo
POVEZANOST RADA
Ustanove:
Kemijsko-tehnološki fakultet, Split