Pregled bibliografske jedinice broj: 917227
Design of the fixed bed column for lead removal on natural zeolite based on batch studies
Design of the fixed bed column for lead removal on natural zeolite based on batch studies // Book of Abstracts of the 3rd International Symposium on Environmental Managament Toward Sustainable Technologies / Koprivanac, N. ; Kušić, H. ; Lončarić Božić, A. (ur.).
Zagreb: Fakultet kemijskog inženjerstva i tehnologije Sveučilišta u Zagrebu, 2011. str. 89-89 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 917227 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Design of the fixed bed column for lead removal on natural zeolite based on batch studies
Autori
Vukojević Medvidović, Nediljka ; Perić, Jelena ; Trgo, Marina ; Nuić, Ivona ; Ugrina, Marin
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of Abstracts of the 3rd International Symposium on Environmental Managament Toward Sustainable Technologies
/ Koprivanac, N. ; Kušić, H. ; Lončarić Božić, A. - Zagreb : Fakultet kemijskog inženjerstva i tehnologije Sveučilišta u Zagrebu, 2011, 89-89
ISBN
978-953-6470-55-6
Skup
3rd International Symposium on Environmental Managament Toward Sustainable Technologies
Mjesto i datum
Zagreb, Hrvatska, 26.10.2011. - 28.10.2011
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
lead ; natural zeolite ; column modeling ; Mass Transfer Model
Sažetak
This paper presents the prediction of breakthrough curves for the fixed bed column based on batch studies. Batch studies of lead removal on natural zeolite clinoptilolite have been performed. The obtained experimental data have been tested according to the Langmuir and Freundlich isotherms, and their parameters have been calculated. These parameters and the Mass Transfer Model have been used to predict theoretical breakthrough curves. Theoretical breakthrough curves have been compared with the experimental ones and a good agreement has been observed. This indicates that the Mass Transfer Model is applicable for prediction of breakthrough curves from batch studies. The overall mass transfer coefficient has been calculated from column experiments. This value allows for calculation of the height of the mass transfer zone as a very important parameter necessary for the column design.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo
POVEZANOST RADA
Ustanove:
Kemijsko-tehnološki fakultet, Split
Profili:
Marina Trgo
(autor)
Nediljka Vukojević
(autor)
Marin Ugrina
(autor)
Ivona Nuić
(autor)
Jelena Perić
(autor)