Pregled bibliografske jedinice broj: 917186
Scanning electron microscope comparative surface evaluation of glazed-lithium disilicate ceramics under different irradiation settings of Nd:YAG and Er:YAG lasers
Scanning electron microscope comparative surface evaluation of glazed-lithium disilicate ceramics under different irradiation settings of Nd:YAG and Er:YAG lasers // Angle orthodontist, 88 (2018), 1; 75-81 doi:10.2319/062017-408.1 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 917186 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Scanning electron microscope comparative surface evaluation of glazed-lithium disilicate ceramics under different irradiation settings of Nd:YAG and Er:YAG lasers
Autori
Viskić, Joško ; Jokić, Dražen ; Jakovljević, Suzana ; Bergman, Lana ; Milardović Ortolan, Slađana ; Meštrović, Senka ; Mehulić, Ketij
Izvornik
Angle orthodontist (0003-3219) 88
(2018), 1;
75-81
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
orthodontic bonding ; lithium disilicate ; Er:YAG ; Nd:YAG ; dental lasers ; hydro-fluoric acid
Sažetak
Objective: To evaluate the surface of glazed lithium disilicate dental ceramics after irradiation under different irradiation settings of Nd:YAG and Er:YAG lasers using a scanning electron microscope (SEM). Materials and Methods: Three glazed-press lithium disilicate ceramic discs were treated with HF, Er:YAG, and Nd:YAG, respectively. The laser-setting variables tested were laser mode, repetition rate (Hz), power (W), time of exposure (seconds), and laser energy (mJ). Sixteen different variable settings were tested for each laser type, and all the samples were analyzed by SEM at 500 x and 1000 x magnification. Results: Surface analysis of the HF-treated sample showed a typical surface texture with a homogenously rough pattern and exposed ceramic crystals. Er:YAG showed no effect on the surface under any irradiation setting. The surface of Nd:YAG-irradiated samples showed cracking, melting, and resolidifying of the ceramic glaze. These changes became more pronounced as the power increased. At the highest power setting (2.25 W), craters on the surface with large areas of melted or resolidified glaze surrounded by globules were visible. However, there was little to no exposure of ceramic crystals or visible regular surface roughening. Conclusions: Neither Er:YAG nor Nd:YAG dental lasers exhibited adequate surface modification for bonding of orthodontic brackets on glazed lithium disilicate ceramics compared with the control treated with 9.5% HF.
Izvorni jezik
Engleski
Znanstvena područja
Dentalna medicina
POVEZANOST RADA
Ustanove:
Stomatološki fakultet, Zagreb,
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Suzana Jakovljević
(autor)
Senka Meštrović
(autor)
Ketij Mehulić
(autor)
Joško Viskić
(autor)
Slađana Milardović Ortolan
(autor)
Lana Bergman
(autor)
Dražen Jokić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
- MEDLINE