Naslov
A simplified engineering method for a T-joint welding simulation

Autori
Perić, Mato ; Tonković, Zdenko ; Karšaj, Igor ; Stamenković, Dragi

Izvornik
Thermal science (0354-9836) 22 (2018), S3; 867-873

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
welding process, residual stress, T-joint fillet weld, finite element analysis

Sažetak
In the framework of this study a hybrid sequential thermo-mechanical finite element analysis of a T-joint fillet welding is performed. In the thermal analysis the element birth and death technique is applied to simulate weld filler deposition, while the mechanical analysis is performed simultaneously to avoid possible problems due to large displacements induced by large strains. The calculated plate deflections are compared with the experimental measurements while the obtained residual stresses are compared with the analytical solution from the literature. The simulated results demonstrate that proposed method can be effectively used to predict the residual stresses and distortions induced by the T-joint welding of two plates.

Izvorni jezik
Engleski

POVEZANOST RADA