Pregled bibliografske jedinice broj: 906774
Analysis of dynamics and fit of diving suits
Analysis of dynamics and fit of diving suits // Proceedings of 17th World Textile Conference AUTEX 2017, IOP Conference Series: Materials Science and Engineering, 2017.
Krf, Grčka: IOP Publishing, 2017. str. 1-6 doi:10.1088/1757-899X/254/15/152007 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 906774 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Analysis of dynamics and fit of diving suits
Autori
Mahnic Naglic, Maja ; Petrak, Slavenka ; Gersak, Jelka ; Rolich, Tomislav
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 17th World Textile Conference AUTEX 2017, IOP Conference Series: Materials Science and Engineering, 2017.
/ - : IOP Publishing, 2017, 1-6
Skup
17th World Textile Conference AUTEX 2017 - Shaping the Future of Textiles
Mjesto i datum
Krf, Grčka, 29.05.2017. - 31.05.2017
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
dynamic anthropometry ; 3D flattening ; pressure analysis, stretch analysis
Sažetak
Paper presents research on dynamical behaviour and fit analysis of customised diving suits. Diving suits models are developed using the 3D flattening method, which enables the construction of a garment model directly on the 3D computer body model and separation of discrete 3D surfaces as well as transformation into 2D cutting parts. 3D body scanning of male and female test subjects was performed with the purpose of body measurements analysis in static and dynamic postures and processed body models were used for construction and simulation of diving suits prototypes. All necessary parameters, for 3D simulation were applied on obtained cutting parts, as well as parameters values for mechanical properties of neoprene material. Developed computer diving suits prototypes were used for stretch analysis on areas relevant for body dimensional changes according to dynamic anthropometrics. Garment pressures against the body in static and dynamic conditions was also analysed. Garments patterns for which the computer prototype verification was conducted were used for real prototype production. Real prototypes were also used for stretch and pressure analysis in static and dynamic conditions. Based on the obtained results, correlation analysis between body changes in dynamic positions and dynamic stress, determined on computer and real prototypes, was performed.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
HRZZ-IP-2013-11-3011 - Primjena matematičkog modeliranja i inteligentnih algoritama pri konstrukciji odjeće (AMMIACC) (Rolich, Tomislav) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- Scopus