Pregled bibliografske jedinice broj: 905897
Numerical dynamic stress analysis of air blast impact to the gas cylinder
Numerical dynamic stress analysis of air blast impact to the gas cylinder // Abstract book for the 13th Miklos Ivanyi International PhD&DLA Symposium / Fulop, Attila ; Ivanyi, Peter (ur.).
Pečuh: Pollack Press, 2017. str. 47-47 (predavanje, međunarodna recenzija, prošireni sažetak, znanstveni)
CROSBI ID: 905897 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Numerical dynamic stress analysis of air blast impact to the gas cylinder
Autori
Grgić, Ivan ; Ivandić, Željko ; Kozak, Dražan
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, prošireni sažetak, znanstveni
Izvornik
Abstract book for the 13th Miklos Ivanyi International PhD&DLA Symposium
/ Fulop, Attila ; Ivanyi, Peter - Pečuh : Pollack Press, 2017, 47-47
ISBN
978-963-642-780-1
Skup
13th Miklos Ivanyi International PhD&DLA Symposium
Mjesto i datum
Pečuh, Mađarska, 03.11.2017. - 04.11.2017
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Dynamic stress analysis ; Gas cylinder ; TNT ; Air blast
Sažetak
According to the Ordinance on liquefied petroleum gas (LPG), the storage of gas cylinders is usually carried out in the open space. Since this storage space is in most cases located next to the fuel supply station whereby the safety distance of the bottle storage to any possible permanent ignition source is 5 meters, there is always a potential risk of explosion. In order to show how the material of the gas cylinders behaves at the explosion, the impact of the air blast was simulated. The gas cylinder used for the analysis was a capacity of up to 10 kg. The 3D model of the gas cylinder was made in SolidWorks according to 10 HRN MZ2.510 regulative and numerical analysis was made in Abaqus and in Ls-Dyna. The initiation of the explosion is set at different distances from the gas cylinder starting from the 5 meters and closer, and also it is time-dependent. For the explosion model, 10 kg, 50 kg and 100 kg of TNT charging were used.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
152-1201910-1909 - Analiza i procjena loma konstrukcija iz anizotropnih materijala (Kozak, Dražan, MZOS ) ( CroRIS)
Ustanove:
Strojarski fakultet, Slavonski Brod