Pregled bibliografske jedinice broj: 895586
Phase transformation and microstructure study of the as-cast Cu-rich Cu-Al-Mn ternary alloys
Phase transformation and microstructure study of the as-cast Cu-rich Cu-Al-Mn ternary alloys // Journal of mining and metallurgy. Section: B, Metallurgy, 53 (2017), 3; 413-422 doi:10.2298/JMMB170809039H (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 895586 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Phase transformation and microstructure study of the
as-cast Cu-rich Cu-Al-Mn ternary alloys
Autori
Holjevac Grgurić, Tamara ; Manasijević, Dragan ; Kožuh, Stjepan ; Ivanić, Ivana ; Balanović, Ljubiša ; Anžel, Ivan ; Kosec, Borut ; Bizjak , Milan ; Knežević, Monika ; Gojić, Mirko
Izvornik
Journal of mining and metallurgy. Section: B, Metallurgy (1450-5339) 53
(2017), 3;
413-422
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Cu-Al-Mn alloys, SMA alloys, microstructure, phase transformations
Sažetak
Four Cu-rich alloys from the ternary Cu-Al-Mn system were prepared in the electric-arc furnace and casted in cylindrical moulds with dimensions: =8 mm and length 12 mm. Microstructural investigations of the prepared samples were performed by using optical microscopy (OM) and scanning electron microscopy, equipped by energy dispersive spectroscopy (SEM-EDS). Assignation of crystalline phases was confirmed by XRD analysis. Phase transition temperatures were determined using simultaneous thermal analyzer STA DSC/TG. Phase equilibria calculation of the ternary Cu-Al- Mn system was performed using optimized thermodynamic parameters from literature. Microstructure and phase transitions of the prepared as-cast alloys were investigated and experimental results were compared with the results of thermodynamic calculations.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo, Metalurgija
Napomena
Glavni autor: Tamara Holjevac Grgurić
POVEZANOST RADA
Projekti:
HRZZ-IP-2014-09-3405 - Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra (DMFP-CuSMA) (Gojić, Mirko, HRZZ - 2014-09) ( CroRIS)
Ustanove:
Metalurški fakultet, Sisak
Profili:
Mirko Gojić
(autor)
Tamara Holjevac Grgurić
(autor)
Ivana Ivanić
(autor)
Stjepan Kožuh
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus