Pregled bibliografske jedinice broj: 89489
Adhesion wear resistance of heat treated steels for artillery weapon barrel
Adhesion wear resistance of heat treated steels for artillery weapon barrel // Proceedings of the 1st International Conference on Materials & Tribology 2002 : MT 2002 / Kennedy, D.M. (ur.).
Dublin: Technological University Dublin, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 89489 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Adhesion wear resistance of heat treated steels for artillery weapon barrel
Autori
Jakopčić, Mirko ; Grilec, Krešimir ; Stojković, Vjekoslav
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 1st International Conference on Materials & Tribology 2002 : MT 2002
/ Kennedy, D.M. - Dublin : Technological University Dublin, 2002
Skup
International Conference on Materials & Tribology (1 ; 2002)
Mjesto i datum
Dublin, Irska, 12.09.2002. - 13.09.2002
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
adhesion wear resistance; heat treated steels; artillery weapon barrel
Sažetak
The paper describes the procedure and results of adhesive wear resistance tests done on the samples made of the 30CrNiMo8, 39NiCrMo3 and 42CrMo4 steels, which are suitable for artillery weapon barrel production. All samples were quenched and tempered at 50 ± ; 2 HRC. One third of samples was subsequently hard-chrome plated, and the other one third of samples was nitrated. The adhesive tribological pair was made of chosen steel and CuZn39Pb2 brass samples. The brass is used to produce the rotating band of an artillery projectile. The measured friction force FF and frictional coefficient CF were the wear intensity indicators. They were the least at nitrated samples.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
