Naslov
TRACEABILITY IN FORCE MEASUREMENT IN REPUBLIC OF CROATIA

Autori
Alar, Željko ; Franz, Mladen

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
VDI-Berichte 1685 / - Düsseldorf : VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 2002, 623-629

Skup
Joint International Conference IMEKO TC3/TC5/TC20:Proceedings of the International Conference on Force, Mass, Torque, Hardness and Civil Engineering Metrology in the age globalization

Mjesto i datum
Celle, Njemačka, 24.09.2002. - 26.09.2002

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Uncertainty of measurement; Force; Traceability; Calibration

Sažetak
In this study based on previous calibrations and factory specifications, an analysis of equipment for measurement of force in Republic of Croatia has been made. Transfer force standards of the Laboratory for Testing Mechanical Properties ( LIMS) have been calibrated at HBM, Germany. Obtained curves of calibration for single transfer standards were used to estimate standard uncertainties and also the expanded uncertainty of measurement was calculated at every measuring point, according to document EA- 4/15. The best measuring capability of the Laboratory was estimated and the scheme for equipment calibration for the measurement of force in Croatia was developed. Comparing of previous and the last results of the calibration for same transfer standards, conclusion about the influence of the use to the characteristics of standards during a period of time made was made.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA