Pregled bibliografske jedinice broj: 893841
The influence of chloride ion concentration on the corrosion behavior of the CuAlNi alloy
The influence of chloride ion concentration on the corrosion behavior of the CuAlNi alloy // Tehnički glasnik - Technical Journal, 11 (2017), 3; 67-72 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 893841 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The influence of chloride ion concentration on the
corrosion behavior of the CuAlNi alloy
Autori
Vrsalović, Ladislav ; Ivanić, Ivana ; Čudina, Diana ; Lokas, Lea ; Kožuh, Stjepan ; Gojić, Mirko
Izvornik
Tehnički glasnik - Technical Journal (1846-6168) 11
(2017), 3;
67-72
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
corrosion ; CuAlNi alloy ; electrochemical methods ; SEM/EDS analysis ; shape memory alloy
Sažetak
The influence of different chloride ions concentration (0.1 %, 0.5 %, 0.9 % and 1.5 % NaCl solution) on electrochemical behaviour of cast CuAlNi alloy, were investigated with electrochemical techniques (open circuit potential measurements, linear and potentiodynamic polarization measurements and electrochemical impedance spectroscopy (EIS)). After polarization measurements, electrode surfaces were investigated by optical microscope and with SEM/EDS analysis. Polarization measurements revealed that the increase in chloride ion concentration leads to increase the corrosion current density values and decrease the polarization resistance values which indicated higher corrosion attack on the alloy. Investigation of alloy surfaces by optical microscope and SEM/EDS analysis has shown that there is no indication of pitting corrosion in 0.1 % NaCl solution but pits have been clearly visible on the samples which were investigated in higher chloride concentration solutions. EDS analysis have shown the existence of copper oxide on electrode surface, and the presence of a small percentage of aluminium in the form of aluminium oxide.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo, Metalurgija
Napomena
Glavni autor: Ladislav Vrsalović, Ivana Ivanić
POVEZANOST RADA
Projekti:
HRZZ-IP-2014-09-3405 - Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra (DMFP-CuSMA) (Gojić, Mirko, HRZZ - 2014-09) ( CroRIS)
Ustanove:
Kemijsko-tehnološki fakultet, Split,
Metalurški fakultet, Sisak
Profili:
Ivana Ivanić
(autor)
Ladislav Vrsalović
(autor)
Lea Lokas
(autor)
Stjepan Kožuh
(autor)
Mirko Gojić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)