Naslov
Single Point Incremental Forming of Polymers – a review of process parameters

Autori
Borić, Andrej ; Pepelnjak, Tomaž ; Jurkovic, Zoran

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, T. ; Car, Z. ; Kudláček, J. - Jaromer : Tehnički fakultet Sveučilišta u Rijeci, 2017, 255-258

Skup
International Conference on Innovative Technologies, IN-TECH 2017

Mjesto i datum
Ljubljana, Slovenija, 11.09.2017. - 13.09.2017

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Single Point Incremental Forming ; Polymers ; Formability ; Process parameters

Sažetak
In this paper, is given a systematic quantitative review of Single Point Incremental Forming (SPIF) process parameters that affect the formability of the polymer sheets during forming process. The obtained results from several relevant papers are collected and compared, such as a tool diameter, material thickness, step down, feed rate, spindle speed and their interactions were analysed. Only the most basic process parameters are selected because it has been shown that those ones are necessary for every SPIF process. This analysis contains data of an ideal operating range for each process parameter for seven different polymers. In the study, it has been shown that main parameters of SPIF process of polymers are not independent.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA