Pregled bibliografske jedinice broj: 89093
On the sensitivity of residual stresses determined using the hole-drilling method
On the sensitivity of residual stresses determined using the hole-drilling method // Naše More, 48 (2001), 3/4; 137-144 (podatak o recenziji nije dostupan, kongresno priopcenje, znanstveni)
CROSBI ID: 89093 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
On the sensitivity of residual stresses determined using the hole-drilling method
Autori
Jani, Barle ; Vatroslav, Grubišić ; Stjepan, Jecić ;
Izvornik
Naše More (0469-6255) 48
(2001), 3/4;
137-144
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, kongresno priopcenje, znanstveni
Ključne riječi
residual stress measurement; hole driling technique; sensitivity
Sažetak
The objective of this paper is to examine the effects of measurement error on residual stresses evaluated with Hole drilling and Integral Method calculation. Adetailed analysis of causes and magnitudes of strain measurement error is beyond the scope of this paper. The indicators needed for the error estimation and depth increment distributions with respect to systematic and random errors are discussed. It is shown that the maximum attention must be devoted to random errors. According to presented result it was concluded that practically no more than three points of residual stress distribution can be calculated.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus
Uključenost u ostale bibliografske baze podataka::
- Biological Abstracts
