Pregled bibliografske jedinice broj: 885039
Catalytic performance of mixed Mn-M (M: Fe, Ni, Cu) oxides in toluene oxidation
Catalytic performance of mixed Mn-M (M: Fe, Ni, Cu) oxides in toluene oxidation // International Conference 16th Ružička days “TODAY SCIENCE – TOMORROW INDUSTRY” PROCEEDINGS / Jukić, Ante ; Šubarić, Drago (ur.).
Zagreb: Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI), 2017. str. 98-108 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 885039 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Catalytic performance of mixed Mn-M (M: Fe, Ni, Cu) oxides in toluene oxidation
Autori
Duplančić, Marina ; Babić, Kristina ; Tomašić, Vesna ; Gomzi, Zoran
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
International Conference 16th Ružička days “TODAY SCIENCE – TOMORROW INDUSTRY” PROCEEDINGS
/ Jukić, Ante ; Šubarić, Drago - Zagreb : Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI), 2017, 98-108
Skup
International Conference 16th Ružička days “TODAY SCIENCE – TOMORROW INDUSTRY”
Mjesto i datum
Vukovar, Hrvatska, 21.09.2016. - 23.09.2016
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
katalitička oksidacija, toluen, miješani metalni oksidi, koprecipitacija
(Catalytic oxidation, toluene, mixed manganese oxides, coprecipitation)
Sažetak
Volatile organic compounds (VOCs) are recognized as the major contributors to global air pollution and the development of the effective methods and materials for the abatement of VOCs became of great importance. Catalytic oxidation is the most promising technology for VOC abatement and most of the catalysts used for this purpose are, generally, very active but also very expensive noble metals (Pt, Pd, etc). Therefore, many efforts have been made towards the design of cheaper catalyst materials based on the mixed transition metal oxides. This paper deals with preparation, characterization and catalytic activity of the mixed manganese oxides, Mn-M (M: Fe, Ni, Cu) used for catalytic oxidation of toluene. Catalysts were synthesized by the coprecipitation method and various instrumental techniques were used for their characterization. Catalytic tests were performed in the fixed bed flow reactor. The influences of different reaction conditions on the catalytic performance were examined using gaseous mixture of toluene and nitrogen (242ppm of toluene/nitrogen) and air as an oxidant. Tests were performed at different temperatures (373-675K) and various total flow rates of the reaction mixture (23-138cm3/min) at the constant catalyst mass (0.05g). Obtained mesoporous catalysts show high low- temperature activities for the toluene oxidation with T90 temperatures, corresponding to 90% of the toluene conversion, observed at 450K and even lower temperatures.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo
POVEZANOST RADA
Ustanove:
Fakultet kemijskog inženjerstva i tehnologije, Zagreb