Pregled bibliografske jedinice broj: 876292
Surface roughness analysis at plasma cutting
Surface roughness analysis at plasma cutting // Proceedings of 15th International Conference on Tribology, SERBIATRIB ‘17 / Mitrović, Slobodan (ur.).
Kragujevac: University of Kragujevac, Faculty of Engineering, 2017. str. 366-370 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 876292 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Surface roughness analysis at plasma cutting
Autori
Nedić, Bogdan ; Janković, Marko ; Peko, Ivan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 15th International Conference on Tribology, SERBIATRIB ‘17
/ Mitrović, Slobodan - Kragujevac : University of Kragujevac, Faculty of Engineering, 2017, 366-370
ISBN
9788663350410
Skup
15th International Conference on Tribology, SERBIATRIB '17
Mjesto i datum
Kragujevac, Srbija, 17.05.2017. - 19.05.2017
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
plasma arc cutting, experiment, quality of cut, process parameters, surface roughness
Sažetak
This paper presents experimental results concerning the surface roughness variation at plasma cutting plate of structural steel St 52- 3 N 4 mm thickness. For measuring roughness used Talysurf 6 device. The correlation between surface roughnes and the process input parameters is analyzed. The paper shows the effect of traverse rate, current intensity, gas pressure, and distance between the nozzle exit and the material on surfaces roughnes. Conclusions and theoretical considerations of other authors who investigated topography and quality of the surface after plasma cutting are presented.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split
Profili:
Ivan Peko
(autor)
