Naslov
Properties that characterize the material X46Cr13 steel

Autori
Brnić, Josip ; Kršćanski, Sanjin ; Brčić, Marino ; Niu, Jitai

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING / Zeng, Jianmin ; Sun, Dongke ; Han, Qingyou - Seattle (WA) : Purdue University Press, 2016

ISBN
978-1-62671-076-4

Skup
8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING

Mjesto i datum
Seattle (WA), Sjedinjene Američke Države, 14.10.2016. - 17.10.2016

Vrsta sudjelovanja
Plenarno

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Mechanical properties; Short-time creep; Fatigue; X46Cr13 steel

Sažetak
One of the most important issue in engineering design is the knowledge about the material to be used. In this sense, this study deals with the determination of material properties of investigated material X46Cr13. Ultimate tensile strength, yield strength, modulus of elasticity as well as creep behavior were determined using material testing machine. Results are presented in the form of engineering stress-strain curves and creep curves. On the basis of experimentally obtained results it is evident that this steel possess acceptable – high values of material properties but it cannot be tread as enough creep resistant. Although it is not presented in this study, this material is also tested to fatigue and Charpy impact energy was tested too.

Izvorni jezik
Engleski

Znanstvena područja
Brodogradnja, Strojarstvo, Temeljne tehničke znanosti

POVEZANOST RADA