Pregled bibliografske jedinice broj: 85509
Cutting Forces and Adhesive Flank Wear Model
Cutting Forces and Adhesive Flank Wear Model // Proceedings of the 1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02 / Katalinic, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International Vienna ; Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2002. str. 161-166 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 85509 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Cutting Forces and Adhesive Flank Wear Model
Autori
Cukor, Goran
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02
/ Katalinic, Branko ; Kljajin, Milan - Slavonski Brod : DAAAM International Vienna ; Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2002, 161-166
Skup
1st DAAAM International Conference on "Advanced Technologies for Developing Countries" ATDC'02
Mjesto i datum
Slavonski Brod, Hrvatska, 12.09.2002. - 14.09.2002
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Turning; Flank wear model; Tool-condition monitoring
Sažetak
The single most significant type of turning tool wear that has drawn constant attention is flank wear. In order to predict the progress of flank wear land in this study, adhesive wear has been considered as the predominant one at low machining temperatures. An adhesive flank wear-time model was derived for possible use for in-process tool-condition monitoring through measurements of the variations in cutting force components in xy-plane. Predictions from the model correlate well with the actual flank wear measurements.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
