Pregled bibliografske jedinice broj: 848729
Structural analysis of in-plane loaded CLT beam with holes: FE-analyses and parameter studies
Structural analysis of in-plane loaded CLT beam with holes: FE-analyses and parameter studies // International Network on Timber Engineering Research - INTER Proceedings / Rainer Gorlacher (ur.).
Karlsruhe: Timber Scientific Publishing - KIT Holzbau un Baukonstruktionen, 2016. str. 153-166 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 848729 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Structural analysis of in-plane loaded CLT beam with
holes: FE-analyses and parameter studies
Autori
Jeleč, Mario ; Rajčić, Vlatka ; Danielsson, Henrik ; Serrano Erik
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
International Network on Timber Engineering Research - INTER Proceedings
/ Rainer Gorlacher - Karlsruhe : Timber Scientific Publishing - KIT Holzbau un Baukonstruktionen, 2016, 153-166
Skup
International Network on Timber Engineering Research - INTER Meeting
Mjesto i datum
Graz, Austrija, 16.08.2016. - 19.08.2016
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Cross laminated timber ; CLT ; in-plane loading ; bending stress ; shear stress ; FE-analysis ; holes ; stress concentration ; distribution of stress
Sažetak
A major obstacle for developers, producers and designers is the current status of CLT in European product and design standards. A product standard for CLT, EN 16351, has just recently been published but CLT is still not included in the current version of Eurocode 5. There are however some design handbooks available and other technical documentation issued by the producers. The practicing engineer is hence left with a fragmented body of handbooks, European Technical Assessments, research reports, conference proceedings and journal papers for design of CLT-elements. This paper is aimed at giving a considerable contribution to the on-going review process of Eurocode 5, as a background paper regarding CLT- beams with holes and notches. The paper is focused on the numerical analysis of cross- laminated timber (CLT) beams with holes or notches loaded in- plane under various loading conditions. Special emphasis is on shear loading and the in-plane shear behavior considering the complex internal structure of the CLT element. Cross laminated timber presents a much better solution for beams with holes or notches as compared to glued laminated timber thanks to its lay-up: tensile forces perpendicular to the beam axis can be transferred by the transversal layers.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Ustanove:
Građevinski fakultet, Zagreb,
Građevinski i arhitektonski fakultet Osijek
