Pregled bibliografske jedinice broj: 845006
Modelling SMD capacitors by measurements
Modelling SMD capacitors by measurements // 2016 39th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO)
Opatija, Hrvatska, 2016. str. 104-109 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 845006 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Modelling SMD capacitors by measurements
Autori
Mišlov, Roko ; Magerl, Marko ; Fratte-Sumper, Sandra ; Weiss, Bernhard ; Stockreiter, Christian ; Barić, Adrijan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
2016 39th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO)
/ - , 2016, 104-109
Skup
2016 39th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO)
Mjesto i datum
Opatija, Hrvatska, 30.05.2016. - 03.06.2016
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
SMD capacitor modelling; SMA connector modelling; CPW-CB modelling; S-parameter measurements
Sažetak
The lumped models of several capacitors in SMD- 0603 package are extracted from S-parameter measurements. The S-parameters of the SMD components are obtained: (i) by modelling the RF connector and transmission lines and de- embedding, and (ii) by directly calibrating the reference plane to the SMD component using on- board calibration standards. The extracted parasitics related to the SMD component package are compared for capacitors of different nominal values and for the two calibration methods in the frequency range up to 8 GHz.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb
Profili:
Marko Magerl
(autor)