Naslov
Research of the Motorcycle Trousers Functionality Depending of Construction Parameters of Cutting Parts

Autori
Petrak, Slavenka ; Jukl, Nikolina ; Hursa Šajatović, Anica ; Geršak, Jelka

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Book of Proceedings of the 8th International Textile, Clothing & Design Conference 2016 – Magic World of Textiles / Dragčević, Zvonko ; Hursa Šajatović, Anica ; Vujasinović, Edita - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2016, 260-265

Skup
8th International Textile, Clothing & Design Conference 2016 – Magic World of Textiles

Mjesto i datum
Dubrovnik, Hrvatska, 02.10.2016. - 05.10.2016

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
motorcycle pants ; functionality ; cutting parts ; 3D prototype.

Sažetak
Motorcycle pants, as a protective garment for special purposes, have to satisfied a number of conditions in order to the criteria of functionality. This refers to the design of the model, construction/design of cutting parts, choice of materials, clothing technology and incorporation of protective elements. Due to prolonged exposure of drivers to dangerous conditions while driving, and the specific body position, garment must not in any of its parts, cause too much pressure on the body, i.e. the material from which the garment is made should be able to bear increased stress, and at the same time it must allow sufficient flexibility and comfort to the driver. This paper presents results of the conducted research regarding the impact/influence of constructional elements of cutting parts to the functionality of the two selected models of motorcycle pants/ trousers. Physical and mechanical properties of the material intended for the production of mentioned trousers are determined. Based on the obtained properties, a computational analysis of stress and stretch/elongation of the material in/on characteristic areas of the trousers. 3D scanning of respondent in body positions/postures characteristic for motorcycle riders was performed. Obtained computer models of the body were then used for 3D simulations of model prototypes in precisely chosen/defined positions of the body. By analyzing the results, it was determined which of the two models provides better functionality aspects of the design style.

Izvorni jezik
Engleski

Znanstvena područja
Tekstilna tehnologija

POVEZANOST RADA