Pregled bibliografske jedinice broj: 83869
Stress-strain state at the vicinity of the crack tip in strength mis-match welded joint
Stress-strain state at the vicinity of the crack tip in strength mis-match welded joint // Proceedings of the XIII European Conference on Fracture (CD-Room), Fracture Mechanics: Applications and Challenges / Fuentes, Manuel ; Elices, Manuel ; Meizoso, Antonio-Martin (ur.).
Oxford: Elsevier, 2000. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 83869 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Stress-strain state at the vicinity of the crack tip in strength mis-match welded joint
Autori
Matejiček, Franjo ; Gubeljak, Nenad ; Kozak, Dražan ; Kocak, Mustafa
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the XIII European Conference on Fracture (CD-Room), Fracture Mechanics: Applications and Challenges
/ Fuentes, Manuel ; Elices, Manuel ; Meizoso, Antonio-Martin - Oxford : Elsevier, 2000
Skup
13th European Conference on Fracture - ECF 13, Fracture Mechanics: Applications and Challenges
Mjesto i datum
Donostia-San Sebastián, Španjolska, 06.09.2000. - 09.09.2000
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
mis-match welded joint
Sažetak
The safe use of any welded structure is not only dependent on the fracture toughness of the joint, but also on the capacity of the material to yield and harden in the vicinity of a flaw. In welded joints defects are generally located in several microstructures which have different mechanical properties and strain hardening behaviours. Therefore, fracture behaviour is affected by the interaction of different microstructures at the crack tip. Even if each microstructure behaves independently in a ductile manner, a welded joint, and thus a whole welded structure, can fracture in a brittle manner due to the aforementioned interaction. The aim of this paper is to analyse the stress and strain state at the crack tip, as affected by heterogeneous microstructure and to evaluate the initiation of stable crack growth.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Ustanove:
Strojarski fakultet, Slavonski Brod