Naslov
Finite element model of welded joint with crack-tip in the heat affected zone

Autori
Kozak, Dražan

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 5th International Scientific Conference on Production Engineering / Cebalo, Roko, Schulz, Herbert - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 1999

Skup
5th International Scientific Conference on Production Engineering CIM '99

Mjesto i datum
Opatija, Hrvatska, 17.06.1999. - 18.06.1999

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
high strength steels; welded joint; strength mismatching; finite element method; crack; fracture mechanics

Sažetak
The possibility of failure of welded structures is depending on fracture mechanics properties of weld joints. The aim of this paper was to determine appropriate numerical model to simulate the experimental evaluation of fracture mechanics specimens. To this purpose, standard BxB single edge notch bend (SENB) three points bend (TPB) specimens made with surface notch tip in the heat affected zone (HAZ) were applied. The X-grooved welded joint is homogenous with the strength higher then base material (overmatching). The comparison between numerical and known experimental results is done by using measured values of fracture behaviour as are crack tip opening displacement (CTOD), load line displacement (LLD) and crack mouth opening displacement (CMOD). The finite elements results shown that using of described numerical procedure for threshold determination of safe load for real welded different structures is possible.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA