Pregled bibliografske jedinice broj: 832017
Monitoring of vertical cuts in soft rock mass, defining erosion rates and modelling time- dependent geometrical development of the slope
Monitoring of vertical cuts in soft rock mass, defining erosion rates and modelling time- dependent geometrical development of the slope // Rock Mechanics and Rock Engineering: From the Past to the Future / Ulusay, Resat ; Aydan, Omer ; Gercek, Hasan ; Ali Hindistan, Mehmet ; Tuncay, Ergun (ur.).
London : Delhi: Taylor & Francis, 2016. str. 1249-1254 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 832017 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Monitoring of vertical cuts in soft rock mass, defining erosion rates and modelling time- dependent geometrical development of the slope
(Monitoring of vertical cuts in soft rock mass, defining erosion rates and modelling time- dependent geometrical development of the slop)
Autori
Vlastelica, Goran ; Miščević Predrag ; Fukuoka, Hiroshi
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Rock Mechanics and Rock Engineering: From the Past to the Future
/ Ulusay, Resat ; Aydan, Omer ; Gercek, Hasan ; Ali Hindistan, Mehmet ; Tuncay, Ergun - London : Delhi : Taylor & Francis, 2016, 1249-1254
ISBN
978-1-138-03265-1
Skup
ISRM International Symposium: EUROCK 2016
Mjesto i datum
Kapadokija, Turska, 29.08.2016. - 31.08.2016
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
marl; soft rock; cut; TLS; monitoring; modelling; back analysis
Sažetak
Usage of Terrestrial Laser Scanners (TLS) is currently the best way of monitoring and detecting changes in slope morphology. In this study Optech ILRIS-3D was used. First scan of slope morphology with ILRIS-3D was made in March 2012 at presented pilot location “Žnjan” and it was repeated in 6 month intervals to this day. Series of observations in man-made cuts at additional 14 pilot sites usingTLS were also made. For the purpose of forecasting and retrograde analysis, the survey was conducted in different time intervals and number of observations. Main goal of this monitoring was to define the average rate of erosion in cuts in this type of material. Also, a proper procedure for establishing future monitoring in this type of materials is introduced, as well as guidelines for selecting minimum and maximum time intervals. Finally, based on the results of monitoring, known mathematical model for development of erosion in cuts is calibrated and the guidelines for its usage are proposed.
Izvorni jezik
Engleski
Znanstvena područja
Geologija, Geodezija, Građevinarstvo
POVEZANOST RADA
Ustanove:
Fakultet građevinarstva, arhitekture i geodezije, Split
