Naslov
Additive manufacturing of fixture for automated 3D scanning - case study

Autori
Krznar, Nino ; Pilipović, Ana ; Šercer, Mladen

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, pp prezentacija, stručni

Izvornik
International Conference on Manufacturing Engineering and Materials, ICMEM 2016, Novy Smokovec, Slovačka / - , 2016

Skup
International Conference on Manufacturing Engineering and Materials, ICMEM 2016

Mjesto i datum
Vysoké Tatry, Slovačka, 06.06.2016. - 10.06.2016

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
3D modeling ; additive manufacturing ; scanning ; special fixture

Sažetak
Additive technologies have their place in process of making new parts, from idea to final product. First step in all additive manufacturing is the development of a 3D CAD model which can be made by 3D modeling in any CAD software or 3D scanning and reverse engineering. When scanning parts in automated measuring cell on rotation table, some kind of fixture or jig is needed to keep part in place. Thin-wall plastic parts tend to deform under effect of their own weight or if they are pressed to tight in fixture. This paper shows case study of developing of 3D CAD model of fixture that holds parts during automated 3D scanning for large number of same parts. Also this special fixture that holds part with its geometry in place is made with additive technology, which enables production of complex geometry with lower costs of production because you need for each product special fixture, which in most cases is impossible or difficult to produce using conventional methods.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA