Pregled bibliografske jedinice broj: 822458
Flow and turbulence in the boundary layer wind tunnel controlled using various hardware devices
Flow and turbulence in the boundary layer wind tunnel controlled using various hardware devices // Proceedings of the 8th International Colloquium on Bluff Body Aerodynamics and Applications
Boston (MA), 2016. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 822458 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Flow and turbulence in the boundary layer wind tunnel controlled using various hardware devices
Autori
Kuznetsov, Sergey ; Ribičić, Matko ; Pospíšil, Stanislav ; Plut, Mihael ; Trush, Arsenii ; Kozmar, Hrvoje
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 8th International Colloquium on Bluff Body Aerodynamics and Applications
/ - Boston (MA), 2016
Skup
8th International Colloquium on Bluff Body Aerodynamics and Applications
Mjesto i datum
Boston (MA), Sjedinjene Američke Države, 07.06.2016. - 11.06.2016
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Atmospheric boundary layer; wind-tunnel simulation; separate influences of various hardware devices
Sažetak
Extensive measurements are carried out in the boundary layer wind tunnel to distinguish between separate influences of various hardware devices on flow and turbulence characteristics, as well as on the simulated atmospheric boundary layer. The velocity is measured using hot-wire at various positions in the wind- tunnel test section. Experimental results are reported as vertical profiles of mean flow velocity, turbulence intensity and length scales of turbulence. The barrier is observed to cause a decrease in flow velocity and an increase in turbulence close to surface. Vortex generators enhance turbulence throughout the entire height range under scope. Increased turbulence and decreased flow velocity are particularly exhibited close to surface due to surface roughness. Influence of each of the hardware devices is quantified in a dimensionless form.
Izvorni jezik
Engleski
Znanstvena područja
Matematika, Fizika, Strojarstvo
POVEZANOST RADA
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Hrvoje Kozmar
(autor)